[WriteLog] WriteLog Digest, Vol 124, Issue 9
DickT-W0RAA
dickt at w0raa.com
Tue Apr 2 17:57:19 EDT 2013
Ed, to answer your question on freezing, YES, I have experienced it using
XP/SP3.
So far 2Tone has been a huge PITA. But, one way or the other I will get it
going,
and hope I can get some help.
I left a message with Subject: Help! and I hope somebody can.
Dick
W0RAA
dickt [at] w0raa.com
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 2 Apr 2013 09:14:04 -0700
> From: Ed Muns <w0yk at msn.com>
> To: "'Jerry Pixton'" <jpixton at shentel.net>
> Cc: writelog at contesting.com
> Subject: Re: [WriteLog] Can not switch TNC???
> Message-ID: <BLU0-SMTP149DF70DCCFA7E1417EB41D90DF0 at phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> Jerry W6IHG wrote:
>> From the mail I think several of us are having the same
>> problem with 11.10.
>>
>> The basic problem is rttyrite freezes up when its tnc menu is touched.
>
> Yes, this has been reported by several people here on the reflector. I
> also
> experience this once in a while when I'm stressing the software with my
> testing on various PCs. THE SOLUTION THAT HAS ALWAYS WORKED FOR ME IS TO:
>
> 1. CLOSE WRITELOG.
> 2. OPEN WRITELOG.INI WITH A TEXT EDITOR. (WRITELOG.INI IS IN THE WINDOWS
> DIRECTORY ON XP AND EARLIER. ON VISTA AND LATER, USE THE LINK TO
> WRITELOG.INI ON THE WRITELOG MENU IN YOUR PROGRAMS MENU FROM THE WINDOWS
> START BUTTON.)
> 3. FIND ALL [Rttyrite...] SECTIONS AND DELETE THEM SAVE WRITELOG.INI AND
> EXIT THE TEXT EDITOR.
> 4. OPEN WRITELOG AND SETUP YOUR RTTYRITE WINDOW(S) AGAIN.
>
> NOTE: DON AND I SUSPECT THIS PROBLEM IS COMMON TO VISTA/WINDOWS 7/WINDOWS
> 8
> SYSTEMS THAT USE THE VIRTUALSTORE. IT WOULD HELP US TRACK DOWN THE
> PROBLEM
> IF THIS IS TRUE. HAS ANYONE HAD THE FREEZE ISSUE ON WINDOWS XP (OR
> EARLIER
> OS)?
>
> I ALSO SUSPECT IT MAY ONLY HAPPEN WHEN YOU START WRITELOG THE FIRST TIME
> AFTER AN INSTALL OR UPGRADE. PLEASE ALSO CONFIRM OR DENY THIS?
>
> Sorry for the caps. I don't mean to shout, but several of us have posted
> this advice many times in the last four days and it doesn't seem to be
> noticed. ;>)
>
>> I am just trying to get mmtty plug-in to work the same as it
>> has for me in 11.08.
>
> Upgrading to 11.10G should require nothing unless you incur the freezing
> problem. MMTTY with the MMTTY Plug-In will continue to work without
> change.
> Make sure 'MMTTY' is checked on the Rttyrite TNC menu. Do not use the
> XMMT.ocx menu choice if you want to use the MMTTY Plug-In.
>
>> This morning, I uninstalled 11.08 again (after making a
>> backup) because it went in the wrong directory yesterday.
>>
>> I then installed 11.10 in c:\HamPrograms\Writelog\ I deleted
>> the [rttyrite] and [rttyrite2] sections from the writelog.ini
>> in ...virtualStore... and saved it.
>>
>> I then started writelog and opened a rttyrite window. Then
>> selected mmtty. Had to point to the proper directory (I did
>> not reinstall mmtty).
>> The rtty control panel for mmtty opened.
>>
>> But as soon as I try to go to TNC Setup to adjust the mmtty
>> appearance, rttyrite freezes!
>>
>> When I also go to the Stereo Soundboard AFSK option, rttyrite
>> freezes (that was the original problem I had).
>>
>> And somewhere along the line I had to reinstall the mmtty
>> plugin because I was getting errors messages about "failed to
>> create custom ... tnc header"
>>
>> Also I have been unable to save the size and location of the
>> rttyrite window using the Save Configuration option.
>>
>> I deleted the writelog.ini in ...virtualStore... to let
>> writelog build a new one. But that did not solve the problem.
>>
>> So basically I can not get back to the configuration of mmtty
>> that I had with 11.08.
>>
>> Any ideas???? Meanwhile I have regressed back to writelog 11.08
>
> I assume your OS is Vista or later since you mention VirtualStore. If I
> understand the description of your actions and problems, it sounds like
> you
> did not delete the [Rttyrite...] sections in writelog.ini after you got
> the
> freeze. I understand you deleted the entire writelog.ini. That's not the
> same thing, so please try the instructions above when you encounter the
> freeze. Your goal, after a freeze, is to edit the working writelog.ini
> file, not delete it. Deleting it probably means that WriteLog reverts to
> initializing with the default writelog.ini file stored in Windows in an
> earlier installation.
>
> I'm also a bit nervous about multiple installations of WriteLog in
> different
> directories. I don't know how the Registry and VirtualStore behave in
> that
> case. If it were me, I'd uninstall all of them and only have one on the
> computer at a time.
>
>> Someone commented re: cleaning the registry values. Is that necessary?
>
> I haven't heard this and I would relegate this to a last resort and only
> if
> you get clear instructions from someone really understands what to do.
> For
> me, the only person I'd trust is W5XD.
>
> Ed W0YK
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 02 Apr 2013 20:06:22 +0000
> From: Jerry Pixton <jpixton at shentel.net>
> To: w0yk at msn.com
> Cc: writelog at contesting.com
> Subject: Re: [WriteLog] Can not switch TNC???
> Message-ID: <515B3A3E.6060606 at shentel.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> ED, et al
>
> Please notice that I did follow the advice being given and removed the
> [rttyrite...] sections in the writelog.ini in the virtual store
> location. That did not help. So then I removed the entire writelog.ini
> to let writelog rebuild. That did not work either!
>
> This is a Windows 7 Pro platform.
>
> In the two attempts I have made, I have restarted writelog many times
> and each time I open a mmtty-plug-in window and then try to either
> change the TNC settings from rttyrite or try to close the mmtty window
> by changing tnc to stereo soundboard AFSK rttyrite freezes requiring
> Task Manager to kill it. The mmtty window will then close ok.
>
> So it is more than the first time writelog is started after an install.
> This was a full install (over writelog 11.08) as my key had expired. So
> I don't know what happens with just an upgrade.
>
> One full install was to the ...Program Files... location and one was to
> my c:\HamPrograms directory.
>
> What other tests can I do to help locate this issue?
>
> In rereading our messages carefully, I do see a slight difference in
> what I did vs what you said. I believe I deleted the [rtty...] sections
> before starting writelog and rttyrite - not after the first freeze and
> kill process step.
>
> I do not have multiple versions of writelog in different directories - I
> did uninstall when I want to put writelog back where I wanted in
> c:\HamPrograms.
>
> Thanks to everyone who is trying to sort this out.
>
> Jerry, W6IHG
>
>
> On 4/2/2013 4:14 PM, Ed Muns wrote:
>> Jerry W6IHG wrote:
>>> From the mail I think several of us are having the same
>>> problem with 11.10.
>>>
>>> The basic problem is rttyrite freezes up when its tnc menu is touched.
>>
>> Yes, this has been reported by several people here on the reflector. I
>> also
>> experience this once in a while when I'm stressing the software with my
>> testing on various PCs. THE SOLUTION THAT HAS ALWAYS WORKED FOR ME IS
>> TO:
>>
>> 1. CLOSE WRITELOG.
>> 2. OPEN WRITELOG.INI WITH A TEXT EDITOR. (WRITELOG.INI IS IN THE
>> WINDOWS
>> DIRECTORY ON XP AND EARLIER. ON VISTA AND LATER, USE THE LINK TO
>> WRITELOG.INI ON THE WRITELOG MENU IN YOUR PROGRAMS MENU FROM THE WINDOWS
>> START BUTTON.)
>> 3. FIND ALL [Rttyrite...] SECTIONS AND DELETE THEM SAVE WRITELOG.INI
>> AND
>> EXIT THE TEXT EDITOR.
>> 4. OPEN WRITELOG AND SETUP YOUR RTTYRITE WINDOW(S) AGAIN.
>>
>> NOTE: DON AND I SUSPECT THIS PROBLEM IS COMMON TO VISTA/WINDOWS
>> 7/WINDOWS 8
>> SYSTEMS THAT USE THE VIRTUALSTORE. IT WOULD HELP US TRACK DOWN THE
>> PROBLEM
>> IF THIS IS TRUE. HAS ANYONE HAD THE FREEZE ISSUE ON WINDOWS XP (OR
>> EARLIER
>> OS)?
>>
>> I ALSO SUSPECT IT MAY ONLY HAPPEN WHEN YOU START WRITELOG THE FIRST TIME
>> AFTER AN INSTALL OR UPGRADE. PLEASE ALSO CONFIRM OR DENY THIS?
>>
>> Sorry for the caps. I don't mean to shout, but several of us have posted
>> this advice many times in the last four days and it doesn't seem to be
>> noticed. ;>)
>>
>>> I am just trying to get mmtty plug-in to work the same as it
>>> has for me in 11.08.
>>
>> Upgrading to 11.10G should require nothing unless you incur the freezing
>> problem. MMTTY with the MMTTY Plug-In will continue to work without
>> change.
>> Make sure 'MMTTY' is checked on the Rttyrite TNC menu. Do not use the
>> XMMT.ocx menu choice if you want to use the MMTTY Plug-In.
>>
>>> This morning, I uninstalled 11.08 again (after making a
>>> backup) because it went in the wrong directory yesterday.
>>>
>>> I then installed 11.10 in c:\HamPrograms\Writelog\ I deleted
>>> the [rttyrite] and [rttyrite2] sections from the writelog.ini
>>> in ...virtualStore... and saved it.
>>>
>>> I then started writelog and opened a rttyrite window. Then
>>> selected mmtty. Had to point to the proper directory (I did
>>> not reinstall mmtty).
>>> The rtty control panel for mmtty opened.
>>>
>>> But as soon as I try to go to TNC Setup to adjust the mmtty
>>> appearance, rttyrite freezes!
>>>
>>> When I also go to the Stereo Soundboard AFSK option, rttyrite
>>> freezes (that was the original problem I had).
>>>
>>> And somewhere along the line I had to reinstall the mmtty
>>> plugin because I was getting errors messages about "failed to
>>> create custom ... tnc header"
>>>
>>> Also I have been unable to save the size and location of the
>>> rttyrite window using the Save Configuration option.
>>>
>>> I deleted the writelog.ini in ...virtualStore... to let
>>> writelog build a new one. But that did not solve the problem.
>>>
>>> So basically I can not get back to the configuration of mmtty
>>> that I had with 11.08.
>>>
>>> Any ideas???? Meanwhile I have regressed back to writelog 11.08
>>
>> I assume your OS is Vista or later since you mention VirtualStore. If I
>> understand the description of your actions and problems, it sounds like
>> you
>> did not delete the [Rttyrite...] sections in writelog.ini after you got
>> the
>> freeze. I understand you deleted the entire writelog.ini. That's not
>> the
>> same thing, so please try the instructions above when you encounter the
>> freeze. Your goal, after a freeze, is to edit the working writelog.ini
>> file, not delete it. Deleting it probably means that WriteLog reverts to
>> initializing with the default writelog.ini file stored in Windows in an
>> earlier installation.
>>
>> I'm also a bit nervous about multiple installations of WriteLog in
>> different
>> directories. I don't know how the Registry and VirtualStore behave in
>> that
>> case. If it were me, I'd uninstall all of them and only have one on the
>> computer at a time.
>>
>>> Someone commented re: cleaning the registry values. Is that necessary?
>>
>> I haven't heard this and I would relegate this to a last resort and only
>> if
>> you get clear instructions from someone really understands what to do.
>> For
>> me, the only person I'd trust is W5XD.
>>
>> Ed W0YK
>>
>>
>
> --
> -----------------------------------------------
> Dr. Jerry R. Pixton, PIXOS Designs
> http://www.shentel.net/pixosdesigns/RadioTuner/
> jpixton at shentel.net
> -----------------------------------------------
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 2 Apr 2013 13:19:32 -0700
> From: Ed Muns <w0yk at msn.com>
> To: "'Jerry Pixton'" <jpixton at shentel.net>
> Cc: writelog at contesting.com
> Subject: Re: [WriteLog] Can not switch TNC???
> Message-ID: <BLU0-SMTP1190BACFE872BB38D449B1290DF0 at phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> Thanks for the clarification, Jerry. That answers all my questions about
> your configuration and process. I see nothing wrong. I want to do some
> re-testing and see if I can reproduce what you and others are reporting.
>
> Ed W0YK
>
>
>
>
> Jerry W6IHG wrote:
>> Please notice that I did follow the advice being given and
>> removed the [rttyrite...] sections in the writelog.ini in the
>> virtual store location. That did not help. So then I removed
>> the entire writelog.ini to let writelog rebuild. That did not
>> work either!
>>
>> This is a Windows 7 Pro platform.
>>
>> In the two attempts I have made, I have restarted writelog
>> many times and each time I open a mmtty-plug-in window and
>> then try to either change the TNC settings from rttyrite or
>> try to close the mmtty window by changing tnc to stereo
>> soundboard AFSK rttyrite freezes requiring Task Manager to
>> kill it. The mmtty window will then close ok.
>>
>> So it is more than the first time writelog is started after
>> an install.
>> This was a full install (over writelog 11.08) as my key had
>> expired. So I don't know what happens with just an upgrade.
>>
>> One full install was to the ...Program Files... location and
>> one was to my c:\HamPrograms directory.
>>
>> What other tests can I do to help locate this issue?
>>
>> In rereading our messages carefully, I do see a slight
>> difference in what I did vs what you said. I believe I
>> deleted the [rtty...] sections before starting writelog and
>> rttyrite - not after the first freeze and kill process step.
>>
>> I do not have multiple versions of writelog in different
>> directories - I did uninstall when I want to put writelog
>> back where I wanted in c:\HamPrograms.
>>
>> Thanks to everyone who is trying to sort this out.
>>
>> Jerry, W6IHG
>>
>>
>> On 4/2/2013 4:14 PM, Ed Muns wrote:
>> > Jerry W6IHG wrote:
>> >> From the mail I think several of us are having the same problem
>> >> with 11.10.
>> >>
>> >> The basic problem is rttyrite freezes up when its tnc menu
>> is touched.
>> >
>> > Yes, this has been reported by several people here on the
>> reflector.
>> > I also experience this once in a while when I'm stressing
>> the software
>> > with my testing on various PCs. THE SOLUTION THAT HAS
>> ALWAYS WORKED FOR ME IS TO:
>> >
>> > 1. CLOSE WRITELOG.
>> > 2. OPEN WRITELOG.INI WITH A TEXT EDITOR. (WRITELOG.INI IS IN THE
>> > WINDOWS DIRECTORY ON XP AND EARLIER. ON VISTA AND LATER,
>> USE THE LINK
>> > TO WRITELOG.INI ON THE WRITELOG MENU IN YOUR PROGRAMS MENU FROM THE
>> > WINDOWS START BUTTON.) 3. FIND ALL [Rttyrite...] SECTIONS
>> AND DELETE
>> > THEM SAVE WRITELOG.INI AND EXIT THE TEXT EDITOR.
>> > 4. OPEN WRITELOG AND SETUP YOUR RTTYRITE WINDOW(S) AGAIN.
>> >
>> > NOTE: DON AND I SUSPECT THIS PROBLEM IS COMMON TO VISTA/WINDOWS
>> > 7/WINDOWS 8 SYSTEMS THAT USE THE VIRTUALSTORE. IT WOULD
>> HELP US TRACK
>> > DOWN THE PROBLEM IF THIS IS TRUE. HAS ANYONE HAD THE
>> FREEZE ISSUE ON
>> > WINDOWS XP (OR EARLIER OS)?
>> >
>> > I ALSO SUSPECT IT MAY ONLY HAPPEN WHEN YOU START WRITELOG THE FIRST
>> > TIME AFTER AN INSTALL OR UPGRADE. PLEASE ALSO CONFIRM OR DENY THIS?
>> >
>> > Sorry for the caps. I don't mean to shout, but several of us have
>> > posted this advice many times in the last four days and it
>> doesn't seem to be
>> > noticed. ;>)
>> >
>> >> I am just trying to get mmtty plug-in to work the same as
>> it has for
>> >> me in 11.08.
>> >
>> > Upgrading to 11.10G should require nothing unless you incur the
>> > freezing problem. MMTTY with the MMTTY Plug-In will
>> continue to work without change.
>> > Make sure 'MMTTY' is checked on the Rttyrite TNC menu. Do
>> not use the
>> > XMMT.ocx menu choice if you want to use the MMTTY Plug-In.
>> >
>> >> This morning, I uninstalled 11.08 again (after making a
>> >> backup) because it went in the wrong directory yesterday.
>> >>
>> >> I then installed 11.10 in c:\HamPrograms\Writelog\ I deleted the
>> >> [rttyrite] and [rttyrite2] sections from the writelog.ini in
>> >> ...virtualStore... and saved it.
>> >>
>> >> I then started writelog and opened a rttyrite window. Then
>> selected
>> >> mmtty. Had to point to the proper directory (I did not reinstall
>> >> mmtty).
>> >> The rtty control panel for mmtty opened.
>> >>
>> >> But as soon as I try to go to TNC Setup to adjust the mmtty
>> >> appearance, rttyrite freezes!
>> >>
>> >> When I also go to the Stereo Soundboard AFSK option,
>> rttyrite freezes
>> >> (that was the original problem I had).
>> >>
>> >> And somewhere along the line I had to reinstall the mmtty plugin
>> >> because I was getting errors messages about "failed to
>> create custom
>> >> ... tnc header"
>> >>
>> >> Also I have been unable to save the size and location of
>> the rttyrite
>> >> window using the Save Configuration option.
>> >>
>> >> I deleted the writelog.ini in ...virtualStore... to let writelog
>> >> build a new one. But that did not solve the problem.
>> >>
>> >> So basically I can not get back to the configuration of
>> mmtty that I
>> >> had with 11.08.
>> >>
>> >> Any ideas???? Meanwhile I have regressed back to writelog 11.08
>> >
>> > I assume your OS is Vista or later since you mention
>> VirtualStore. If
>> > I understand the description of your actions and problems,
>> it sounds
>> > like you did not delete the [Rttyrite...] sections in writelog.ini
>> > after you got the freeze. I understand you deleted the entire
>> > writelog.ini. That's not the same thing, so please try the
>> > instructions above when you encounter the freeze. Your
>> goal, after a
>> > freeze, is to edit the working writelog.ini file, not delete it.
>> > Deleting it probably means that WriteLog reverts to
>> initializing with
>> > the default writelog.ini file stored in Windows in an
>> earlier installation.
>> >
>> > I'm also a bit nervous about multiple installations of WriteLog in
>> > different directories. I don't know how the Registry and
>> VirtualStore
>> > behave in that case. If it were me, I'd uninstall all of them and
>> > only have one on the computer at a time.
>> >
>> >> Someone commented re: cleaning the registry values. Is
>> that necessary?
>> >
>> > I haven't heard this and I would relegate this to a last resort and
>> > only if you get clear instructions from someone really understands
>> > what to do. For me, the only person I'd trust is W5XD.
>> >
>> > Ed W0YK
>> >
>> >
>>
>> --
>> -----------------------------------------------
>> Dr. Jerry R. Pixton, PIXOS Designs
>> http://www.shentel.net/pixosdesigns/RadioTuner/
>> jpixton at shentel.net
>> -----------------------------------------------
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 02 Apr 2013 16:33:13 -0400
> From: "Joe Subich, W4TV" <lists at subich.com>
> To: writelog at contesting.com
> Subject: Re: [WriteLog] MMTTY/2Tone
> Message-ID: <515B4089.9020809 at subich.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
> > But when I clicked on XMMT.ocx nothing happened?
>
> Checking XMMT.ocx enables "TNCs" supported by the XMMT.ocx interface.
> Once you have done that you must select "Configure TNC" to set the
> path to the exe you prefer - either MMTTY or 2Tone.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 4/2/2013 11:17 AM, k0bx at arrl.net wrote:
>> Thanks Steve, I removed the Rttyrite entries from the Writelog.ini and
>> all is
>> well now
>> But when I clicked on XMMT.ocx nothing happened? But when I clicked on
>> MMTTY,
>> it asked me for the location of MMTTY, and
>> after I gave it, MMTTY came up and is working fine. I guess I will have
>> to
>> read AA5AU's webpage before I go any farther.
>> Anyway thanks to you and Mike N0SO for the answer to my problem.
>>
>> Joe K0BX
>>
>> #1 Honor Roll Mixed
>> Honor Roll RTTY
>>
>>
>> Stop the insanity!
>> Please do not add me to any distribution lists (Joke, Stories or Junk)
>> without
>> my permission.
>>
>>
>>
>>
>> ________________________________
>> From: Steve AI9T <steve at ai9t.com>
>> To: writelog at contesting.com
>> Sent: Tue, April 2, 2013 11:48:07 AM
>> Subject: Re: [WriteLog] MMTTY/2Tone
>>
>> Joe
>>
>> I had the same problem with my setup. You will need to remove the
>> [Rttyrite] and [Rttyrite2] sections from your Writelog.INI file in order
>> to proceed with your setup. Then pick the XMMT.ocx from the TU Type Drop
>> Down menu instead of MMTTY.
>>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 02 Apr 2013 17:26:53 -0400
> From: Steve AI9T <steve at ai9t.com>
> To: w0yk at msn.com, 'WriteLog Reflector' <writelog at contesting.com>
> Subject: [WriteLog] Timing in Receive
> Message-ID: <515B4D1D.9010708 at ai9t.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Ed
>
> I'm setting here copying some RTTY station on 20 meters. I am seeing a
> hesitation in the print. WL is printing letters at 2 or 3 or 4 letters
> at a time. I tried this with just MMTTY and N1MM and the print is fine.
> I also tried this with Select BPS on and Off. No difference.
>
> I checked my CPU usage it is mostly on 0
>
> My computer is and Intel i5 3570k processor, 8 GB of RAM. SSD hard Drive.
>
> --
> 73
>
> Steve AI9T
>
> http://www.ai9t.com
>
> AI9T DX Cluster
>
> Version 4 AI9T Telnet: dxc.ai9t.com port 7300
> Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 2 Apr 2013 15:35:54 -0600
> From: "DickT-W0RAA" <dickt at w0raa.com>
> To: "Writelog Reflector" <writelog at contesting.com>
> Subject: [WriteLog] Help!
> Message-ID: <1B52FAEFDE3A4EE7A896E3220CAAD8B9 at 890727fb58a94f5>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I am totally frustrated, as I guess others may well be also. I keep
> getting
> one of those
> Windows error messages that says the program needs to shut down and asks
> if
> I want
> to send a report to MS or not. I usually choose NOT.
>
> Don mentioned there is a section on his web site that shows how to setup
> 2Tone. I am
> not sure if it's finished or not. I know Don has a life in addition to
> 2Tone. I am
> almost ready to forget 2Tone and just stick with MMTTY.
>
> I deleted the [RTTYRITE] and [RTTYRITE2] Sections in Writelog.ini. In the
> new
> version I find a [RTTYRITE] section but no [RTTYRITE2] section. I know
> this
> is
> probably an error on my part, but I am willing to accept any help that
> anybody can
> provide. I'm running Windows XP/SP3.
>
> My WriteLog Program is in C:\Program Files\Writelog folder. MMTTY has
> been
> reinstalled and is in a C:\MMTTY folder and 2Tone is in a C:\2Tone folder.
>
> Writelog and MMTTY are working together just fine, even after I
> reinstalled
> MMTTY in the new C:\MMTTY folder.
>
> I cannot get 2Tone to bring up a window showing the RX & TX graphs, etc.
>
> My transceiver is a Yaesu FT-950 and I am also using a SignaLink USB
> interface,
> which has been working just fine. So if assistance could come from one of
> you
> guys who has a similar setup, I'm sure my problem would get resolved
> quickly. I
> had hoped I wouldn't have to send a "me too" e-mail (as another user
> called
> it),
> but now feel the need.
>
> Any help will be greatly appreciated.
>
> Thanks & 73,
>
> Dick - w0raa
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
> ------------------------------
>
> End of WriteLog Digest, Vol 124, Issue 9
> ****************************************
>
More information about the WriteLog
mailing list