[WriteLog] 2 radios with digi keyer2

[Joe Subich, W4TV]

What interface are you using for the second radio?   DigiKeyer II
handles one rig ... presumably the MK V.  2nd CAT port in Router
provides an opportunity for a second program to "snoop" on data to
the rig connected to DK II.

You will need a CAT connection and port in WriteLog's Ports dialog
for the TS-870.

73,

    ... Joe, W4TV


On 4/17/2013 6:52 PM, rob wrote:
> Hi All
>
> Ok I know I missed it somewhere, and yes I have read the
> Docs on Digi keyer and writelog.......I am trying to get writelog
> to communicate with my ts870   and ft1000 mark 5.
>
> I can get writelog to read the ft1000 frequency fine. I have
> selected two radios from writelog.  I can not get it to read second
> radio's frequency.  I also have a software program
> Comm Cat it WILL read both frequencies at the click of a button.
> I use port 2 for ft1000  and port 3 for ts870.
> In Digikey 2 Main cat port is  2  .....Nothing seems to work for
> 2nd Cat. Not sure if I should do anything there. A couple years
> back I had writelog setup for 2 radios, but then I did not use
> Digi Keyer 2.
>
> Can anyone get pointed in right direction to check out ?
>
> 73 BoB WA1FCN
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>