[WriteLog] AFSK and a PTT Port?

[Jerry Pixton]

Now with writelog v11.11 fixing the AFC issue, I am ready to make 2Tone 
the primary rttyrite TU and move mmtty to the clone window. But...

This is Windows 7 64 bit. I have my Flex 5000 with both receivers, the 
microHAM SO2R+ box, Writelog running the K3 rig driver for SO2V and 
right now mmtty is in use as the primary rttyrite TU with 2Tone as the 
clone and a little relay control software for my two amps. It all works 
amazingly well. For the first time in over the year I have owned the 
Flex 5000 it is all playing like real radios used to.

But the issue is that I need to set one PTT serial port for one radio to 
use. I have always done this in mmtty where I can have PTT and still use 
AFSK when needed.

When I make 2Tone the primary TU for the rttyrite there seems to be no 
way to key a PTT serial port when I have to use AFSK. As soon as I try 
to use a rttyrite port, FSK is assumed.

Am I in never never land? I definitely see the difference in 2Tone 
decode. But I am not seeing a way to make it the primary TU when a PTT 
relay is needed to route the PTT back to the Flex.

Maybe I will just move the clone window up top in place of the mmtty 
window since I can click in either window anyway.

Any ideas???

Jerry, W6IHG
-- 
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton at shentel.net
-----------------------------------------------