[WriteLog] AFSK and a PTT Port?

[Joe Subich, W4TV]

> When I make 2Tone the primary TU for the rttyrite there seems to be
> no way to key a PTT serial port when I have to use AFSK. As soon as I
> try to use a rttyrite port, FSK is assumed.

Do not use a Rttyrite port ... "All mode PTT" works with MK2R+ in AFSK.
PTT will appear on the WinKey 2 output.

73,

    ... Joe, W4TV


On 4/19/2013 8:10 PM, Jerry Pixton wrote:
> Now with writelog v11.11 fixing the AFC issue, I am ready to make 2Tone
> the primary rttyrite TU and move mmtty to the clone window. But...
>
> This is Windows 7 64 bit. I have my Flex 5000 with both receivers, the
> microHAM SO2R+ box, Writelog running the K3 rig driver for SO2V and
> right now mmtty is in use as the primary rttyrite TU with 2Tone as the
> clone and a little relay control software for my two amps. It all works
> amazingly well. For the first time in over the year I have owned the
> Flex 5000 it is all playing like real radios used to.
>
> But the issue is that I need to set one PTT serial port for one radio to
> use. I have always done this in mmtty where I can have PTT and still use
> AFSK when needed.
>
> When I make 2Tone the primary TU for the rttyrite there seems to be no
> way to key a PTT serial port when I have to use AFSK. As soon as I try
> to use a rttyrite port, FSK is assumed.
>
> Am I in never never land? I definitely see the difference in 2Tone
> decode. But I am not seeing a way to make it the primary TU when a PTT
> relay is needed to route the PTT back to the Flex.
>
> Maybe I will just move the clone window up top in place of the mmtty
> window since I can click in either window anyway.
>
> Any ideas???
>
> Jerry, W6IHG