[WriteLog] RTTY two VFOs on a K3 issue

[Joe Subich, W4TV]

 > As soon as I do so,  the K3 was put into split mode, even if the 2
 > frequencies are equal
 >
 > If I press the split button on the k3 front panel. Split goes out for
 > <1second then it comes back again

When using the "SO2V" mode with WriteLog and the K3, Split is enabled
with transmit focus (the "green ball") on VFO B and off with transmit
focus on VFO A.

73,

    ... Joe, W4TV


On 1/14/2013 6:39 AM, Dave WW2R wrote:
> An issue with writelog 11.08b encountered in the RTTY RU contest, any
> suggestions?
>
>
>
> As usual I was running the k3 with a d44 sound card and 2 instances of
> mmtty. MMTTY was fine
>
> In the port settings I have com2 set to k3 and a second com2 set to K3 which
> is allowable
>
> In writelog I set number of radios to 2. I see a frequency entry window for
> each vfo
>
> BUT
>
> As soon as I do so,  the K3 was put into split mode, even if the 2
> frequencies are equal
>
> If I press the split button on the k3 front panel. Split goes out for
> <1second then it comes back again
>
> Making the sub freq entry box "manual entry" stopped it but defeated the
> object/benefits
>
> A better solution was found (empirically) In the port settings. I noticed
> the 1st k3 ptt enable had been set to "no" 2nd k3 ptt enable to "yes" (I
> hadn't set them) so I changed the 2nd k3  to "no" and the split issue went
> away. No idea why! The issue then was that when I restarted the programme
> they got changed back to k3 ptt enable "no" 2nd k3 ptt enable "yes" even
> though I had saved the configuration and the log
>
> After the contest I upgraded to 11.09 but issue still there
>
> I did have a computer with a v10 still on it in the shack (10.83d?) on which
> I didn't have this issue
>
> Apart from that the software worked well. I had, however, forgotten how
> useful the Fkeys programme was!
>
> Dave
>
> G4FRE MW2I
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>