[WriteLog] 2Tone 14.08c keying
Joe Subich, W4TV
lists at subich.com
Thu Aug 14 17:37:16 EDT 2014
2Tone *does not use the UART interface* - it is much like WriteLog's
Software generated FSK. To use 2Tone with microHAM's "keyers", you
need to *uncheck* the "stuff" box in microHAM Router, set 2Tone to
output FSK on TxD and use RTS for PTT (check the PTT box in the FSK
port on Router).
> If I select Headset Earphone (3-microHAM CODEC), which is my normal
> setting, and then click OK, the Transmit Setting box does not retain
> my CODEC selection, but jumps back to the first one in the list. I
> cannot make the microHAM CODEC the selection to use for TX.
The *audio* output is *only used for AFSK*. If you select FSK, the
audio output will not be set/used/saved.
... Joe, W4TV
On 2014-08-14 3:37 PM, Gary AL9A wrote:
> Just downloaded 2Tone 14.08c from Don's web site and it appears there is
> still a problem. The main 2Tone window set to 14.08c will key the
> radio, but it's not using the MKII as I don’t see the text being sent
> printing on the MKII LCD. Also both of my 2tone clone windows don't
> print what is being sent as they used to.
> In checking all my settings I notice that on the 2Tone Settings window
> in the Transmit Setting box the selection is the first one in the list,
> Speakers (SB Xtreme Audio Notebook) which is a slot mounted sound card
> on my PC. If I select Headset Earphone (3-microHAM CODEC), which is my
> normal setting, and then click OK, the Transmit Setting box does not
> retain my CODEC selection, but jumps back to the first one in the list.
> I cannot make the microHAM CODEC the selection to use for TX.
> Looks like I'll be going back the MMTTY and XMMT and 2Tone still has
> some issues, at least for me.
> Gary AL9A
> WriteLog mailing list
> WriteLog at contesting.com
> WriteLog on the web: http://www.writelog.com/
WriteLog mailing list
WriteLog at contesting.com
WriteLog on the web: http://www.writelog.com/
More information about the WriteLog