[WriteLog] 2Tone 14.08c keying

[Gary AL9A]

Once again, Joe to the rescue!  Unchecking the "stuff" box did the trick and 
2Tone 14.08c is now functioning great and my two other clone windows with 
other versions of 2Tone are printing my TX messages as they should.  I 
didn't notice I had "stuff" in Router to uncheck, so without Joe's help I 
would have been wandering in the deep end of the swamp for a long time 
before figuring that one out!  Thanks again Joe!

73,
Gary AL9A

-----Original Message----- 
From: Joe Subich, W4TV
Sent: June 25, 2014 1:33 PM
To: writelog at contesting.com
Subject: Re: [WriteLog] 2Tone 14.08c keying


2Tone *does not use the UART interface* - it is much like WriteLog's
Software generated FSK.  To use 2Tone with microHAM's "keyers", you
need to *uncheck* the "stuff" box in microHAM Router, set 2Tone to
output FSK on TxD and use RTS for PTT (check the PTT box in the FSK
port on Router).

> If I select Headset Earphone (3-microHAM CODEC), which is my normal
> setting, and then click OK, the Transmit Setting box does not retain
> my CODEC selection, but jumps back to the first one in the list. I
> cannot make the microHAM CODEC the selection to use for TX.

The *audio* output is *only used for AFSK*.  If you select FSK, the
audio output will not be set/used/saved.

73,

    ... Joe, W4TV


On 2014-08-14 3:37 PM, Gary AL9A wrote:
> Just downloaded 2Tone 14.08c from Don's web site and it appears there is
> still a problem.  The main 2Tone window set to 14.08c will key the
> radio, but it's not using the MKII as I don’t see the text being sent
> printing on the MKII LCD.  Also both of my 2tone clone windows don't
> print what is being sent as they used to.
>
> In checking all my settings I notice that on the 2Tone Settings window
> in the Transmit Setting box the selection is the first one in the list,
> Speakers (SB Xtreme Audio Notebook) which is a slot mounted sound card
> on my PC.  If I select Headset Earphone (3-microHAM CODEC), which is my
> normal setting, and then click OK, the Transmit Setting box does not
> retain my CODEC selection, but jumps back to the first one in the list.
> I cannot make the microHAM CODEC the selection to use for TX.
>
> Looks like I'll be going back the MMTTY and XMMT and 2Tone still has
> some issues, at least for me.
>
> 73,
> Gary AL9A
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/