[WriteLog] Reassigning Keys - Or Programming Keys?

[Ed Muns]

I use ESM, so the Plus accelerator key is executed when I press Enter at the
end of the QSO.

The other alternative is to define another key on your keyboard to be the
Plus key.  Go to Setup/Keyboard Shortcuts and define Backslash (for example)
to be the Plus key.  Backslash is right above Enter so should be easy to
hit.  But you can choose any key that you won't be using normally:
-=[]\;',.` for other examples.

Ed W0YK


-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Richard
Thorne
Sent: Tuesday, December 30, 2014 16:14
To: Writelog
Subject: [WriteLog] Reassigning Keys - Or Programming Keys?


My current setup requires me to hit the + sign on the numeric keypad of my
key board to enter a qso which then sends the info stored in the F3 key.

It never fails, in the heat of the moment that I hit the 6 or 9 key before
the + sign and I've just hosed up the entry.  I then have to edit the entry
and this is a bit of a problem in the middle of a run.

So how are others handling this?  Is there another key I can use on the main
keyboard that will enter the qso and activate the F3 function key?

Thanks in advance.

Rich - N5ZC
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/