[WriteLog] : MMTTY separate temporary from WRITELOG

[Jay WS7I]

Excellent advice for sure, Joe.

Not only that but it will do CW and FSK using a "Y" cable as the output 
is open collector.  MWR has excellent support available over the phone. 
See their web page.

RIGblaster Support
M9:30 am to 3:30 pm CST
T,W,Th10:30 am to 4:30 pm CST
F2:00 pm to 8:00 pm CST
Call: 1-208-262-9340
All emails answered daily!

They even have some new virtual port software that increases the 
flexibility of the RB Advantage.

On 1/21/2014 1:11 PM, Joe Subich, W4TV wrote:
>
>> As mentioned I have the RIGBLASTER PRO who does the same thing ( rtty
>> on a port and CW on another )
>
> Your Rigblaster Pro will easily do radio control CW and PTT on one port
> with FSK on the second serial port.  The information is in the interface
> Owner's Manual - page 7 "Computer serial Control" with "Com Port & Rig
> Control Jumper Diagrams (P16)" on page 28.  The jumper diagrams you
> need are the second set on page 30.
>
> Various other cabling requirements are documented elsewhere in the RBP
> Owner's Manual.  If you need additional help, I suggest contacting the
> maker of your interface for support rather than arguing that a working
> configuration is not possible with two ports and your interface.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 1/21/2014 3:41 PM, G wrote:
>> NJ0F
>>
>> GEORGE
>>
>>
>>
>> You have two interface - RB advantage = rtty mode and others and your 
>> cheap
>> interface do the CW MODE.
>>
>> But in both case before to pass from one mode to the other you have 
>> to close
>> and change WL  configuration or switching between different ini files.
>>
>> Your answer pse here .
>>
>>
>>
>> As mentioned I have the RIGBLASTER PRO who does the same thing ( rtty 
>> on a
>> port and CW on another )
>>
>> What I am trying to do with WL is running on all bands looking for DX
>> station and passing from a mode to the other but rapidely.
>>
>>
>>
>> I tried the multi ini files ( AL9A ) & it works but I continue my 
>> search for
>> a little faster change.
>>
>>
>>
>>>>> I built an inexpensive keying interface for CW keying so use a 
>>>>> separate
>> COM port for CW. Rigblaster advantage does the rest. <<< ((( is that 
>> mean
>> you have 2 interfaces - one for CW PTT & on for RTTY - on two 
>> different com
>> port ??? )))
>>
>>
>>
>>
>>
>> This way I have Writelog ready to work CW or RTTY without having to 
>> change
>> anything. I minimize the RTTY screen ((( that mean in WL you open a new
>> clone window ???))) until I need it.
>>
>>
>>
>>
>>
>> 73
>>
>>
>>
>> NJ0F
>>
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/