[WriteLog] a couple of nits for MMTTY and 2Tone

[Joe Subich, W4TV]

> - Also I notice that Writelog/2Tone remembers only the last decode
 > setting, not the decode setting for each clone window.

Use a separate directory for each window.  The decode setting, input
channel, port (if using FSK), are all stored in 2tone.ini (one per
directory).

73,

    ... Joe, W4TV


On 2014-07-19 1:33 PM, Jeff Stai wrote:
> I keep forgetting to put these out there to see if there is a solution.
> I've just been taking care to verify settings to get around them, so I
> would call them nits:
>
> - When I open a clone window from a MMTTY main window, I want the clone TX
> port to be set to NONE, which I do. This setting is not remembered the next
> time I open this window - I have to go in to Setup and flip it to NONE.
>
> - When using 2Tone in a SO2V situation, the Right/Left setting for the
> sound card does not get remembered the next time I open the 2Tone windows.
> It just remembers the last one set the last time I opened 2Tone clone
> windows. For example, if I open two 2Tone clones on the left channel and
> then one on the right channel, the next time I run Writelog and open a
> 2Tone clone on the left it comes up on the right (wrong ;) channel.
>
> - Also I notice that Writelog/2Tone remembers only the last decode setting,
> not the decode setting for each clone window.
>
> No big deal, just need to be extra careful. 73 and have fun! jeff wk6i
>