[WriteLog] How to disable mouse scroll wheel?

[Joe Subich, W4TV]

Don,

Mouse_Wheel=10Hz is the default ... it behaves that way if there is
no Mouse_Wheel directive.

With the K3 the Mouse wheel will move VFO A (receiver) and leave
the K3 in split if split is engaged.

I suspect you are seeing the effect of setting IcomForceSplit=2 in
Writelog.ini  From the Writelog Manual [RIGS] section:

> Setting this option to 2 causes WriteLog to do the same as setting 1,
>  but, in addition you tune the rig from its front panel more than
> 500Hz after WriteLog has set it to split, then WriteLog automatically
>  turns the split off.

73,

    ... Joe, W4TV


On 2014-06-04 1:43 PM, Don AA5AU wrote:
> I am wondering if this is a radio-specific problem since a K3 owner replied directly saying the scroll wheel did not behave this way at his QTH. I don't know but I'll check it with my Kenwood radio when I get home tonight.
>
> Gary, what kind of radio will you be using? Check it to see if it behaves as stated. When the radio is in SPLIT, moving the scroll wheel takes the radio out of split. Here's the kicker. This is happening on a fairly new installation of WriteLog and I did not have any MOUSE_WHEEL_HZ in the Configuration section of WriteLog yet. I would have thought that the scroll wheel would not have worked at all in WriteLog but it did. It changed the VFO.
>
> 73, Don AA5AU
>
>
>> ________________________________
>> From: Gary AL9A <al9a at mtaonline.net>
>> To: writelog at contesting.com
>> Sent: Wednesday, June 4, 2014 11:19 AM
>> Subject: Re: [WriteLog] How to disable mouse scroll wheel?
>>
>>
>> Don,
>>
>> Thank you for finding this problem so I can avoid it right from the start
>> and not have to panic about what the &*$% now!
>>
>> 73,
>> Gary AL9A
>>
>> -----Original Message-----
>> From: Don Hill AA5AU
>> Sent: June 04, 2014 3:40 AM
>> To: writelog at contesting.com
>> Subject: Re: [WriteLog] How to disable mouse scroll wheel?
>>
>> Thanks for the suggestions Dan, Jay and Gary.
>>
>> MOUSE_WHEEL_HZ=0 works.
>>
>> It would be nice to use the mouse wheel while split, but not necessary.
>>
>> 73, Don AA5AU
>>
>> -----Original Message-----
>> From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Don
>> Hill AA5AU
>> Sent: Tuesday, June 03, 2014 8:57 PM
>> To: writelog at contesting.com
>> Subject: [WriteLog] How to disable mouse scroll wheel?
>>
>> Operating W1AW/5 from Louisiana tonight and everytime I hit the scroll wheel
>> on my mouse, it takes my Icom IC-756 PRO III out of
>> SPLIT. It's killing me!
>>
>> Anyway to disable the mouse scroll wheel from doing this?
>>
>> Thanks!
>> 73, Don AA5AU
>>
>>
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4592 / Virus Database: 3955/7615 - Release Date: 06/03/14
>>
>>
>>
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>>
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>