[WriteLog] WL DVK w/ Rigblaster Pro

[Bryan Swadener via WriteLog]

Hi Rich,

Oh but, it DID work -- w/o the "Process" switch turned on.  I stated that now, the computer audio comes thru only when the switch is in the "Process" position. The microphone audio comes thru only when the switch is NOT in the "Process" position.

vy 73,

Bryan WA7PRC


>________________________________
> From: Rich <rwnewbould at comcast.net>
>To: Bryan Swadener <bswadener at yahoo.com> 
>Sent: Thursday, June 26, 2014 7:03 PM
>Subject: Re: [WriteLog] WL DVK w/ Rigblaster Pro
> 
>
>I can tell you that it will work, as you said it did work.  The process 
>switch should be off and not needed.  I have seen this at our club 
>station and cannot remember what fixed it, but give me sometime to 
>remember.  To get started plug  headphones or speakers into your 
>computer line out/speaker and  see if you hear your DVK message via WL.  
>Can you send audio to the radio if you plug a mic into the RIGBLASTER?  
>I will try to remember the fix and get back to you.
>
>Rich
>
>
>
>
>On 6/26/2014 6:12 PM, Bryan Swadener via WriteLog wrote:
>> Hi WL List Members,
>>
>> I've been going batty in trying to make WL (v10.78) work with my Rigblaster Pro on SSB. At one time, it worked. However, a lot of time has passed and I have added a WinKeyer USB to get rid of the corrupted Morse problem w/ WinXP. On CW, it now works fine but on fone, not so good.
>>
>> The Rigblaster box has a "Process" toggle switch that passes computer audio to the rig only when it's in the "Process" position but does not pass microphone audio to the rig in that position.  And, when the switch is in the "Process" position, it does NOT pass microphone audio to the rig. Microphone audio is passed to the rig only when the switch is not in the "Process" position. PTT works but, the only time the Rigblaster "PTT" LED comes ON is when connecting to the PC when the PC sees it. I spoke with West Mountain Radio support. We believe there's a problem with communication between WL and the Rigblaster box, possibly a configuration issue in WL.
>>
>> The Rigblaster wants to be COM6, and the WinKeyer wants COM7.  I've edited CommSlot1 and CommSlot2 in the [PORTS] area of WRITELOG.INI to have those values. Is there something more I need to do or change? I'm not trying to do anything more... no rig or rotator control, etc.
>>
>> vy 73,
>> Bryan WA7PRC