[WriteLog] Is anyone using an Icom IC-756 Pro III?

Thu Mar 6 17:43:38 EST 2014

OK, I configured the IC-706mkIIg on my test bench to emulate the 
756ProIII (used the address 6Eh) and configured WriteLog starting with
no [PORTS] or [RIGS] sections in writelog.ini.  I have a different CI-V
interface than you but it should not matter.  I'm using an old K1EL
WinKey keyer on COM3 and the Rig on COM4 at 19,200 bps.  Here are the
[PORTS] and [RIGS] sections of writelog.ini:

> [PORTS]
> CWPTTCONTROL=2
> CWPTTDELAY=20
> CWPTTIDLE=200
> dvktype=3
> dvkport=4
> dvkstoploop=1
> dvkechomic=1
> Comm4RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm4XmitControl=NEVER
> Comm4Used=USED,POLL,53
> CommSlot1=3
> CommSlot2=4
> CommSlot3=5
> CommSlot4=6
> cwtype=6
> cwport=2
> [RIGS]
> Com4:=19200,n,8,2

Note: there is no Icom IC-756PRO=0x6E line ... try getting rid of that
as well.

73,

    ... Joe, W4TV

On 3/6/2014 5:11 PM, w0ej wrote:
> Thanks again Joe, Did as you wrote here to the "letter" but no joy.
> I don't consider myself inept and worked on electronic controllers,
> networking, writing programs, etc in my profession for years and years. I've
> been pouring over the Help file and K9JY site and have received a lot of
> good information from folks here but to no avail.
> At this point I believe I wasted my $30 and will just continue to use N1MM
> (a hell of a lot easier to get setup and working)  as well as SKCCLogger,
> and the other software that has been and continues to communicate to the rig
> over the same cabling that I cannot get WriteLog to communicate on. If the
> rig didn't currently communicate to the computer then I'd know it is
> hardware but since all my other packages work with the setup as is......
>
> I'll leave all the other negative comments that come to mind out of this as
> I know it is frustration speaking. I'll let this sit for a few
> days/week/weeks and give it another shot.
>
> Tnx agn to everyone for you effort es 73,
> Bill - W0EJ
> NAQCC- #2271
> SKCC-  #10440T
> FISTS- #14786
> FPQRP- #2057
>
>
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Joe
> Subich, W4TV
> Sent: Thursday, March 06, 2014 3:49 PM
> To: writelog at contesting.com
> Subject: Re: [WriteLog] Is anyone using an Icom IC-756 Pro III?
>
>
> Get rid of the two Com6:=19200,n,8,1 lines in the [RIG] section.  Use Edit
> Writelog.ini from the Start menu before you start WriteLog.  Then once
> Writelog has started use Setup | Ports to set the port speed to
> 19200 bps, and then "Save Configuration"
>
> 73,
>
>      ... Joe, W4TV
>
>
> On 3/6/2014 3:50 PM, w0ej wrote:
>> Thanks for the info Joe,  I am using a third party and not the CI-V
>> from Icom. This interface works between the rig and computer for all
>> other software packages I run and no issues.
>> The CW is a K1EL Winkeyer USB on Com1 USB port while the rig goes into
>> Com6 USB port. Here is the complete PORTS portion of my INI file and I
>> don't see either of the two strings you note below in your email.(
>> COM#_RTS_INIT and/or COM#_DTR_INI) [PORTS]
>> CWPTTCONTROL=0
>> CWPTTDELAY=0
>> CWPTTIDLE=256
>> dvktype=1
>> dvkport=4
>> cwtype=6
>> cwport=2
>> dvkstoploop=1
>> dvkechomic=1
>> CommSlot1=1
>> Comm6Used=USED,POLL,53
>> Comm6RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
>> Comm6XmitControl=ALWAYS
>> CommSlot2=6
>> CommSlot3=3
>> CommSlot4=4
>> Com2:=19200,n,8,1
>> [WlSound]
>>
>>
>> Actually, I'll just copy the entire INI file here:
>> [Summary]
>> MultNames=Sec,Dx,ITU,DX,Mul,Zn,St,Grid,ZN,MUL,Ca,Co,Pref,HQ,Sta,Prov,D
>> XCC
>> QsoNames=QSO,CW,PH,RT
>> W=186
>> H=151
>> [Configuration]
>> WaveFileLocation=
>> RecordingLocation=C:\Users\bnd\Documents\WriteLog\AudioRecording\
>> DataFiles=C:\Users\bnd\Documents\WriteLog\contest\
>> RigPollInterval=500
>> DisableCommPTT=NO
>> HeadphonesLatch=0
>> EntryIsFreeForm=0
>> EntryIsOnlyFreeForm=0
>> SendCallExchangeKey=10
>> tzseconds=1
>> tziseast=1
>> cwspd00=10
>> cwspd01=12
>> cwspd02=14
>> cwspd03=15
>> cwspd04=16
>> cwspd05=18
>> cwspd06=20
>> cwspd07=22
>> cwspd08=24
>> cwspd09=25
>> cwspd10=28
>> cwspd11=30
>> cwspd12=32
>> cwspd13=35
>> cwspd14=40
>> cwspd15=45
>> cwwt00=113
>> cwwt01=123
>> cwwt02=128
>> cwwt03=133
>> cwwt04=143
>> StationId=A
>> MyNodeName=BNDPC
>> [MULTIPLIERS]
>> CallPrefix=W0EJ
>> [PORTS]
>> CWPTTCONTROL=0
>> CWPTTDELAY=0
>> CWPTTIDLE=256
>> dvktype=1
>> dvkport=4
>> cwtype=6
>> cwport=2
>> dvkstoploop=1
>> dvkechomic=1
>> CommSlot1=1
>> Comm6Used=USED,POLL,53
>> Comm6RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
>> Comm6XmitControl=ALWAYS
>> CommSlot2=6
>> CommSlot3=3
>> CommSlot4=4
>> Com2:=19200,n,8,1
>> [WlSound]
>> Compression=0
>> TxOutDevice=Speakers (2- USB Audio CODEC ) RxInDevice=Microphone (2-
>> USB Audio CODEC
>> LeftFader=0
>> RightFader=0
>> ContinuousRecord=0
>> EnableRecordingLoop=0
>> PauseRecordingDuringXmit=0
>> [Editor_v9]
>> LockDockedBars=0
>> X=319
>> Y=226
>> W=960
>> H=482
>> []
>> W=632
>> H=389
>> [PktSpotBar]
>> DefaultTimeoutSeconds=1200
>> ShowOptions=1
>> SortByAzimuth=0
>> MultsOnly=0
>> DisplayInBandOnly=0
>> AutoScroll=0
>> AzimuthDisplay=1
>> [NetGab]
>> W=284
>> H=116
>> [NetFreqBar]
>> W=276
>> H=116
>> [SuperCheck]
>> W=303
>> H=186
>> [GreatCircle]
>> W=160
>> H=83
>> [CORREL]
>> W=284
>> H=116
>> [RateBar]
>> ShowByMinute=0
>> [CW-DECODER]
>> MinCwIndex=25
>> MaxCwIndex=0
>> Channels=1
>> lowpitch_right=550
>> lowpitch_left=550
>> [Qsl Printing]
>> FaceName=
>> FontHeight=
>> FontWeight=
>> FontFamily=
>> Across=1
>> Down=1
>> TotalHeight=25
>> Left=5
>> Top=5
>> TotalWidth=76
>> [AudioReview]
>> WaveOutDevice=Speakers (2- USB Audio CODEC ) [BandMap]
>> DefaultTimeoutSeconds=1200
>> MenuOn=1
>> X=-1
>> Y=0
>> W=205
>> H=510
>> Color1=0xff0000
>> Color2=0xff00
>> Color3=0xff
>> Color4=0xffff
>> Color5=0xffff00
>> Color6=0xff00ff
>> BkColor=0x0
>> DialColor=0xff00
>> ShowBandEdges=1
>> LimitToBandEdges=1
>> [REPORT]
>> name=Bill Nixon
>> adrline1=30902 Niles School Rd
>> adrline2=Springfield, SD 57062
>> adrline3=
>> [EDITOR]
>> FaceName=
>> FontHeight=-12
>> FontWeight=
>> FontFamily=34
>> X=319
>> Y=226
>> W=960
>> H=482
>> [ENTRY]
>> FaceName=
>> FontHeight=-13
>> FontWeight=
>> FontFamily=33
>> SmartEnterKey=0
>> LogFreqSource=2
>> DupeFreqSource=2
>> LR=0
>> RotatorPort=0
>> RotatorType=0
>> ShowingMemories=3
>> [RIGS]
>> Com6:=19200,n,8,1
>> Icom IC-756PRO=0x6E
>> Com6:=19200,n,8,1
>> [Rttyrite]
>> Port=6
>> X=315
>> Y=0
>> W=960
>> H=509
>> [Network]
>> Wlognet=1
>> LogFileVersion=1
>> [DockScreen-Bar0]
>> BarID=59392
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=33
>> MRUDockBottomPos=153
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar1]
>> BarID=59393
>> [DockScreen-Bar2]
>> BarID=59419
>> Bars=39
>> Bar#0=0
>> Bar#1=59404
>> Bar#2=0
>> Bar#3=59403
>> Bar#4=0
>> Bar#5=59405
>> Bar#6=0
>> Bar#7=59407
>> Bar#8=0
>> Bar#9=59408
>> Bar#10=0
>> Bar#11=59410
>> Bar#12=0
>> Bar#13=59411
>> Bar#14=0
>> Bar#15=59412
>> Bar#16=0
>> Bar#17=59413
>> Bar#18=0
>> Bar#19=59414
>> Bar#20=0
>> Bar#21=59415
>> Bar#22=0
>> Bar#23=59398
>> Bar#24=0
>> Bar#25=59399
>> Bar#26=0
>> Bar#27=59400
>> Bar#28=0
>> Bar#29=124937
>> Bar#30=0
>> Bar#31=59416
>> Bar#32=0
>> Bar#33=59417
>> Bar#34=0
>> Bar#35=49418
>> Bar#36=0
>> Bar#37=49419
>> Bar#38=0
>> [DockScreen-Bar3]
>> BarID=59422
>> Bars=3
>> Bar#0=0
>> Bar#1=59402
>> Bar#2=0
>> [DockScreen-Bar4]
>> BarID=59420
>> Bars=3
>> Bar#0=0
>> Bar#1=59392
>> Bar#2=0
>> [DockScreen-Bar5]
>> BarID=59402
>> XPos=2
>> YPos=-2
>> Docking=1
>> MRUDockID=59422
>> MRUDockLeftPos=2
>> MRUDockTopPos=0
>> MRUDockRightPos=436
>> MRUDockBottomPos=62
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar6]
>> BarID=59404
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=7602460
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=284
>> MRUDockBottomPos=116
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar7]
>> BarID=59403
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=254
>> MRUDockBottomPos=104
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar8]
>> BarID=59405
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=104
>> MRUDockBottomPos=125
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar9]
>> BarID=59407
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=5439648
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=160
>> MRUDockBottomPos=83
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar10]
>> BarID=59408
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=12189999
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=303
>> MRUDockBottomPos=186
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar11]
>> BarID=59409
>> Visible=0
>> [DockScreen-Bar12]
>> BarID=59410
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=9896122
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=186
>> MRUDockBottomPos=151
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar13]
>> BarID=59411
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=7602452
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=276
>> MRUDockBottomPos=116
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar14]
>> BarID=59412
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=7602460
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=284
>> MRUDockBottomPos=116
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar15]
>> BarID=59413
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=9437614
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=430
>> MRUDockBottomPos=144
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar16]
>> BarID=59414
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=59419
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=333
>> MRUDockBottomPos=128
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar17]
>> BarID=59415
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=0
>> MRUDockBottomPos=0
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar18]
>> BarID=59398
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=233
>> MRUDockBottomPos=67
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar19]
>> BarID=59399
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=233
>> MRUDockBottomPos=67
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar20]
>> BarID=59400
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=233
>> MRUDockBottomPos=67
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar21]
>> BarID=59401
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=233
>> MRUDockBottomPos=67
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar22]
>> BarID=59416
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=233
>> MRUDockBottomPos=131
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar23]
>> BarID=59417
>> Visible=0
>> XPos=-2
>> YPos=-2
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=215
>> MRUDockBottomPos=84
>> MRUFloatStyle=8192
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar24]
>> BarID=49418
>> Visible=0
>> XPos=-2
>> YPos=124
>> MRUWidth=25494136
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=124
>> MRUDockRightPos=632
>> MRUDockBottomPos=513
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar25]
>> BarID=49419
>> Visible=0
>> XPos=-2
>> YPos=-2
>> MRUWidth=25494136
>> Docking=1
>> MRUDockID=0
>> MRUDockLeftPos=0
>> MRUDockTopPos=0
>> MRUDockRightPos=632
>> MRUDockBottomPos=389
>> MRUFloatStyle=8196
>> MRUFloatXPos=-2147483648
>> MRUFloatYPos=0
>> [DockScreen-Bar26]
>> BarID=59423
>> Horz=1
>> Floating=1
>> XPos=18
>> YPos=36
>> Bars=3
>> Bar#0=0
>> Bar#1=59401
>> Bar#2=0
>> [DockScreen-Summary]
>> Bars=27
>> ScreenCX=1280
>> ScreenCY=768
>> [KeyboardShortcuts]
>> Alt+K=ToolsCWToggleKeyboard
>> ESCAPE=MessageAbortTransmission
>> Alt+F10=CWFaster
>> Shift+Alt+F10=CWFaster2ndRadio
>> F12=EntryReturnTo0KHz
>> Alt+F09=CWSlower
>> Shift+Alt+F09=CWSlower2ndRadio
>> Shift+PAGEDOWN=CWLigherWeighting
>> Shift+PAGEUP=CWHeavierWeighting
>> F01=Message11
>> F10=Message10
>> Shift+F10=MessageShift10
>> F11=Message11
>> Shift+F11=MessageShift11
>> F02=Message02
>> Shift+F02=MessageShift02
>> F03=Message03
>> Shift+F03=MessageShift03
>> F04=Message04
>> Shift+F04=MessageShift04
>> F05=Message05
>> Shift+F05=MessageShift05
>> F06=Message06
>> Shift+F06=MessageShift06
>> F07=Message07
>> Shift+F07=MessageShift07
>> F08=Message08
>> Shift+F08=MessageShift08
>> F09=Message09
>> Shift+F09=MessageShift09
>> Alt+C=RTTYCallQueue
>> Ctrl+G=EntryGotoMatchingQSO
>> Alt+G=EntrySendNetworkGab
>> Alt+L=RTTYForceLTRS
>> Ctrl+N=EditGetsFocus
>> Alt+N=EditInsertTextAnnotation
>> Ctrl+P=EntryGetsFocus
>> Ctrl+Q=EditLogMarkQsoForQsl
>> Ctrl+T=EntrySendPacketSpot
>> Alt+T=EntrySetupTimedCQ
>> END=EntryFocusAndEnd
>> Ctrl+F01=BandsModeNext
>> Alt+F01=BandsBandDown
>> Ctrl+F02=BandsModePrevious
>> Alt+F02=BandsBandUp
>> Alt+F03=EntrySendPacketSpot
>> Alt+F08=EntryClear
>> HOME=EntryFocusAndHome
>> MULTIPLY=RadioClearRIT
>> Alt+W=EntryClear
>> Ctrl+X=RadioHeadphonesLatch
>> Ctrl+Y=EditKeyboardSelectQso
>> Ctrl+C=EditCopy
>> Ctrl+S=FileSave
>> Ctrl+V=EditPaste
>> Shift+DELETE=EditCut
>> Ctrl+ESCAPE=EditCancel
>> Shift+F01=HelpContext
>> [Recent File List]
>> File1=C:\Users\bnd\Documents\WriteLog\contest\cwt.wl
>> -----Original Message-----
>> From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of
>> Joe Subich, W4TV
>> Sent: Thursday, March 06, 2014 12:17 PM
>> To: writelog at contesting.com
>> Subject: Re: [WriteLog] Is anyone using an Icom IC-756 Pro III?
>>
>>
>> What connection are you using between the computer and transceiver?
>>
>> Are you using a *real* CT-17 CI-V interface with a separate power
>> supply or are you using a third party device?  If you are using a
>> third party CI-V interface (converter) have to checked to determine
>> whether it needs power on the DTR and/or RTS lines?
>>
>> If your interface is "port powered" make sure you are not using PC
>> Generates for CW on the same port as the radio and confirm that you
>> have no COM#_RTS_INIT and/or COM#_DTR_INI directives in writelog.ini
>> that apply to the radio port.
>>
>> 73,
>>
>>       ... Joe, W4TV
>>
>>
>> On 3/6/2014 1:01 PM, w0ej wrote:
>>> Thanks Joe for the info. My rig communicates at 19,200 so when I
>>> installed WriteLog that is the baud rate I set the Port Setup for and
>>> verified in the INI file that I have 19,200,N,8,1
>>>
>>> It was suggested that I go to 9,600 so went into the rig program and
>>> changed to 9600,N,8,1  then went into WL and changed baud rate to
>>> 9600, saved settings and verified in the INI file that the comms are
>>> now 9600.  I then closed down WL, rebooted the rig then reopened WL
>>> with
>> no joy.
>>>
>>> I then reset the rig and WL back to 19,200, I have five separate
>>> software packages that all successfully communicate with the rig at
>>> 19,200 and have been doing so for years. I'm not convinced something
>>> in the INI file is not correct hence my request to see how other's
>>> INI file is setup. That being said, I have two writelog.ini files
>>> which is confusing also. One in the writelog folder and one in the
>>> C:\Windows
>> folder..
>>>
>>> Tnx agn 73,
>>>
>>> Bill - W0EJ
>>>
>>> NAQCC- #2271
>>>
>>> SKCC-  #10440T
>>>
>>> FISTS- #14786
>>>
>>> FPQRP- #2057
>>>
>>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>