[WriteLog] How to setup Writelog for W1AW

[Don AA5AU]

Yes, you can eliminate the Name field or any other field from the entry window like this:

1. Open Contest menu and select Exchange Format Setup.
2. On the left hand side in the column named Exchange Fields, highlight the field you want to eliminate from the entry window.
3. On the right hand side, remove the check from Prompt. Include in QSO entry prompt.
4. Click OK at the bottom of the screen.
5. Save Configuration.
6. Save File.

73, Don AA5AU


>________________________________
> From: "john at kk9a.com" <john at kk9a.com>
>To: writelog at contesting.com 
>Sent: Thursday, May 29, 2014 6:36 AM
>Subject: Re: [WriteLog] How to setup Writelog for W1AW
> 
>
>I use DXpedition mode all the time from P40A and it works fine, with one
>exception. Sometimes I hit the space bar and it goes into the name field. 
>It is a real pain, especially with a laptop, to get it back to the
>callsign if I need to make a correction.  Is there a way to eliminate this
>field?
>
>John KK9A
>
>
>
>To:     "WriteLog Reflector" <writelog at contesting.com>
>Subject:     Re: [WriteLog] How to setup Writelog for W1AW
>From:     "Gary AL9A" <al9a at mtaonline.net>
>Date:     Wed, 28 May 2014 18:05:05 -0800
>List-post:     <writelog at contesting.com">mailto:writelog at contesting.com>
>Steve,
>
>Yup, that's what's happening! I can enter the same call on the same band
>and as long as the mode is different, no dupe! Just a bit confusing. You
>would think that would be an easy bug to fix. Thanks for letting me get a
>good nights sleep tonight!
>
>73,
>Gary AL9A
>
>-----Original Message----- From: Gary AL9A
>Sent: May 28, 2014 5:32 PM
>To: WriteLog Reflector
>Subject: Re: [WriteLog] How to setup Writelog for W1AW
>
>Steve,
>
>Well, that's certainly interesting!  I will try to set it up again tonight
>and make a few "dummy" entries into the log and see how it dupes.  If it
>accepts the same call on the same band but with a different mode and doesn't
>flag it as a dupe then it must be the DXpedition module even though it says
>DXCC tracking module.  Thanks for the tip.
>
>73,
>Gary AL9A
>
>-----Original Message----- From: Steve AI9T
>Sent: May 28, 2014 5:06 PM
>To: Gary AL9A ; WriteLog Reflector
>Subject: Re: [WriteLog] How to setup Writelog for W1AW
>
>Gary
>
>I always pick DXpedition mode and down at the bottom is always shows
>General DX Tracking.
>
>--
>73
>
>Steve AI9T
>
>http://www.ai9t.com
>
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/
>
>
>