[WriteLog] WriteLog Digest, Vol 143, Issue 6
NR Smith
nrsmith at citlink.net
Sun Nov 9 08:47:48 EST 2014
Thanks for responding Gary, I found the problem it was in the soundcard.
73,
Nick
w4gkm
-----Original Message-----
From: writelog-request at contesting.com
Sent: Saturday, November 08, 2014 11:00 AM
To: writelog at contesting.com
Subject: WriteLog Digest, Vol 143, Issue 6
Send WriteLog mailing list submissions to
writelog at contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/writelog
or, via email, send a message with subject or body 'help' to
writelog-request at contesting.com
You can reach the person managing the list at
writelog-owner at contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of WriteLog digest..."
Today's Topics:
1. Re: MMTTY xmit with writelog (Gary AL9A)
2. Re: WriteLog Digest, Vol 143, Issue 5 (NR Smith)
----------------------------------------------------------------------
Message: 1
Date: Fri, 7 Nov 2014 12:12:02 -0900
From: "Gary AL9A" <al9a at mtaonline.net>
To: <writelog at contesting.com>
Subject: Re: [WriteLog] MMTTY xmit with writelog
Message-ID: <D10E65E495C44C46A8771CDA7A9B192E at AL9APC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
Nick,
I'm a bit confused by your message. Are you using the MMTTY plug-in with WL
Rttyrite? It sounds like you are and that the PTT drops as expected there.
If that is correct, are you running MMTTY stand alone when the TX hangs at
the end of a message for several seconds? It sounds to me like that is the
situation.
You don't mention the OS involved on the computer you are using, but there
is a section in the MMTTY Help file that mentions a patch that was added by
AA6YQ for V1.66G to allow MMTTY to run under Vista (and Win7, Win8?) that
requires MMTTY be installed at the C:\ root level, not under C:\Program
Files in order to run properly. There are several sections in the Help
regarding PTT setup so it may be something in there that is the problem.
You don't mention the MMTTY interface you are using so that may be an issue
too.
73,
Gary AL9A
-----Original Message-----
From: NR Smith
Sent: November 06, 2014 12:53 PM
To: writelog at contesting.com
Subject: [WriteLog] MMTTY xmit with writelog
I am setting up a new computer for KA1KIX with MMTTY and Writelog. I have
used this combination for years and never had this problem. At the end of a
transmit, for instance calling CQ with a macro or FKEYS, which I use, at the
end of completion the software continues to transmit for five(5) seconds
with just a tone. With the RTTY Rite using FSK it doesn't to it, it stops
when it reaches the %E as it should.
Searching the archives I found no mention of this occurring, so does anyone
know of this and how would it be corrected.
Thanks,
Nick
w4gkm
-----Original Message-----
From: writelog-request at contesting.com
Sent: Thursday, November 06, 2014 11:00 AM
To: writelog at contesting.com
Subject: WriteLog Digest, Vol 143, Issue 4
Send WriteLog mailing list submissions to
writelog at contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/writelog
or, via email, send a message with subject or body 'help' to
writelog-request at contesting.com
You can reach the person managing the list at
writelog-owner at contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of WriteLog digest..."
Today's Topics:
1. Registration Code (Bruce Sawyer)
2. Registration Code (Bruce Sawyer)
----------------------------------------------------------------------
Message: 1
Date: Wed, 5 Nov 2014 10:44:40 -0800
From: "Bruce Sawyer" <aquariusds at sbcglobal.net>
To: <writelog at contesting.com>
Subject: [WriteLog] Registration Code
Message-ID: <001101cff928$8fc25740$af4705c0$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
I just purchased Writelog via paypal and am trying to install it. To do so,
I need the registration code. Where do I find that? I've looked carefully
at everything that went by me during the purchase and nowhere can I find a
registration code.
Thanks in advance,
Bruce Sawyer, N6NT
------------------------------
Message: 2
Date: Wed, 5 Nov 2014 13:42:40 -0800
From: "Bruce Sawyer" <aquariusds at sbcglobal.net>
To: <writelog at contesting.com>
Subject: [WriteLog] Registration Code
Message-ID: <000b01cff941$6d668720$48339560$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
My apologies to all for taking up the bandwidth earlier today. Steve, AI9T
was the first one to come back and tell me to look in my spam folder. Sure
enough, there was email in there from Writelog with the registration code.
I'm up and running now.but continuing to receive lots of email telling me to
go look in my spam folder. I got it!
Thanks to all for the help.
Bruce, N6NT
------------------------------
Subject: Digest Footer
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
------------------------------
End of WriteLog Digest, Vol 143, Issue 4
****************************************
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
------------------------------
Message: 2
Date: Fri, 7 Nov 2014 16:50:49 -0600
From: "NR Smith" <nrsmith at citlink.net>
To: <writelog at contesting.com>
Subject: Re: [WriteLog] WriteLog Digest, Vol 143, Issue 5
Message-ID: <DB601112C4344B78ABA78BCC8210205F at NickHP>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
The problem I had was solved.
-----Original Message-----
From: writelog-request at contesting.com
Sent: Friday, November 07, 2014 11:00 AM
To: writelog at contesting.com
Subject: WriteLog Digest, Vol 143, Issue 5
Send WriteLog mailing list submissions to
writelog at contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/writelog
or, via email, send a message with subject or body 'help' to
writelog-request at contesting.com
You can reach the person managing the list at
writelog-owner at contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of WriteLog digest..."
Today's Topics:
1. MMTTY xmit with writelog (NR Smith)
2. Re: Band map problems IC 756pro3 (Ken Eigsti)
----------------------------------------------------------------------
Message: 1
Date: Thu, 6 Nov 2014 15:53:02 -0600
From: "NR Smith" <nrsmith at citlink.net>
To: <writelog at contesting.com>
Subject: [WriteLog] MMTTY xmit with writelog
Message-ID: <B2847948D07B40F2BEE42BD6F60F11A7 at NickHP>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I am setting up a new computer for KA1KIX with MMTTY and Writelog. I have
used this combination for years and never had this problem. At the end of a
transmit, for instance calling CQ with a macro or FKEYS, which I use, at the
end of completion the software continues to transmit for five(5) seconds
with just a tone. With the RTTY Rite using FSK it doesn't to it, it stops
when it reaches the %E as it should.
Searching the archives I found no mention of this occurring, so does anyone
know of this and how would it be corrected.
Thanks,
Nick
w4gkm
-----Original Message-----
From: writelog-request at contesting.com
Sent: Thursday, November 06, 2014 11:00 AM
To: writelog at contesting.com
Subject: WriteLog Digest, Vol 143, Issue 4
Send WriteLog mailing list submissions to
writelog at contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/writelog
or, via email, send a message with subject or body 'help' to
writelog-request at contesting.com
You can reach the person managing the list at
writelog-owner at contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of WriteLog digest..."
Today's Topics:
1. Registration Code (Bruce Sawyer)
2. Registration Code (Bruce Sawyer)
----------------------------------------------------------------------
Message: 1
Date: Wed, 5 Nov 2014 10:44:40 -0800
From: "Bruce Sawyer" <aquariusds at sbcglobal.net>
To: <writelog at contesting.com>
Subject: [WriteLog] Registration Code
Message-ID: <001101cff928$8fc25740$af4705c0$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
I just purchased Writelog via paypal and am trying to install it. To do so,
I need the registration code. Where do I find that? I've looked carefully
at everything that went by me during the purchase and nowhere can I find a
registration code.
Thanks in advance,
Bruce Sawyer, N6NT
------------------------------
Message: 2
Date: Wed, 5 Nov 2014 13:42:40 -0800
From: "Bruce Sawyer" <aquariusds at sbcglobal.net>
To: <writelog at contesting.com>
Subject: [WriteLog] Registration Code
Message-ID: <000b01cff941$6d668720$48339560$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
My apologies to all for taking up the bandwidth earlier today. Steve, AI9T
was the first one to come back and tell me to look in my spam folder. Sure
enough, there was email in there from Writelog with the registration code.
I'm up and running now.but continuing to receive lots of email telling me to
go look in my spam folder. I got it!
Thanks to all for the help.
Bruce, N6NT
------------------------------
Subject: Digest Footer
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
------------------------------
End of WriteLog Digest, Vol 143, Issue 4
****************************************
------------------------------
Message: 2
Date: Thu, 6 Nov 2014 15:21:45 -0700
From: Ken Eigsti <diverken at chaffee.net>
To: Dan Karg <dkarg at ekarg.com>
Cc: Patrick Morgan <w0erp at yahoo.com>, dxradio33 <k8fc at k8fc.com>, Ron
Dohmen <ron at n0at.net>, WriteLog at contesting.com
Subject: Re: [WriteLog] Band map problems IC 756pro3
Message-ID:
<CAGmtQ1Tzo+aJHXONxWKYRWQARCAP8xoEuqPuDEPrsrS8V5QWLA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
It is a good thing I wasn't charging myself by the hour for labor!!!
Thanks for all the suggestions and the solution was kind of by accident.
I have two IC756pro3 radios. (Networked for M/S or SO2R)To make a long
story short, one was back from the shop where there was a hard reset done
and it was put in its place in my shack.
Accordingly the CI-V address is suppose to be 6Eh for a 756pro3 which is
where I set both radios. For some reason I remembered that there was a 50h
address floating around, maybe for one of the radios? I changed the address
on the radio with the band map problem, from 6Eh to 50h and it works
great. Not sure why 1 radio has 6Eh and the other identical radio has 50h,
but that is what it takes to make it work. Band map now functions as it
should.
Thanks again for the suggestions
Ken W0LSD
------------------------------
Subject: Digest Footer
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
------------------------------
End of WriteLog Digest, Vol 143, Issue 5
****************************************
------------------------------
Subject: Digest Footer
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
------------------------------
End of WriteLog Digest, Vol 143, Issue 6
****************************************
More information about the WriteLog
mailing list