[WriteLog] Fwd: Re: WinKeyer Problems

[joeduerbusch]

Yes, I have the batteries in the keyer.  I would take a VOM and put it in
the resistance mode, and go across the key1 output of the Winkey3 and look
for the wiggle while keying from Writelog.
If nothing, then I would suspect your Comport (USB) from Writelog/Winkey3.

The other thing I would try is to move the USB Comport from the number you
have to a comport number 4 or above.Sometimes those lower numbers, Windows
reserves for other devices.
I am using comport4.

Joe K0BX


On Tue, Oct 21, 2014 at 5:14 PM, Gary AL9A <al9a at mtaonline.net> wrote:

>   Thanks Joe.  I stand corrected.  Good to know.
>
> 73,
> Gary AL9A
>
>
>
>   *From:* joeduerbusch <k0bx at arrl.net>
> *Sent:* October 21, 2014 7:31 AM
> *To:* Gary AL9A <al9a at mtaonline.net>
> *Cc:* writelog at contesting.com
> *Subject:* Re: [WriteLog] Fwd: Re: WinKeyer Problems
>   I don't seem to have any problem with Writelog newest version and the
> WINKey3.
> I am using Windows 7 64 bit.  Just worked VK9DLX on 20 CW a few minutes
> ago using WL Function key macros to the Winkey3  I selected WinKey2 in the
> WL setup menu for keyer.
> Joe K0BX
>
> On Tue, Oct 21, 2014 at 6:06 AM, Gary AL9A <al9a at mtaonline.net> wrote:
>
>> Hal,
>>
>> Latest WL version is 11.22G, but I doubt that will solve your problem.
>> If your device is a WinKey3 then you are probably going to need Wayne to
>> release a new diver/interface for that device to make it work.
>>
>> 73,
>> Gary AL9A
>>
>> -----Original Message----- From: Hal Kennedy
>> Sent: October 20, 2014 3:53 PM
>> To: writelog at contesting.com
>> Subject: [WriteLog] Fwd: Re: WinKeyer Problems
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Latest version of WL, I think  11.21P.  Same problem on a WIN7 and an XP
>> machine.
>>
>> Hal
>> N4GG
>>
>> On 10/20/2014 7:03 PM, Joe Subich, W4TV wrote:
>>
>>>
>>> What version of Writelog?
>>>
>>>
>>> 73,
>>>
>>>    ... Joe, W4TV
>>>
>>>
>>> On 2014-10-20 6:56 PM, Hal Kennedy wrote:
>>>
>>>> Trying to hook up a K1EL Winkeyer USB (I think this is a WINKey 3) with
>>>> WL.  If I go to >ports ad select CW on the proper COM port, then
>>>> selected CW sends either the K1EL Winkeyer or K1EL WInkeyer 2 and hit
>>>> "Apply"  The keyer locks up.  Any ideas?
>>>> 73
>>>> Hal
>>>> N4GG
>>>>
>>>> _______________________________________________
>>>> WriteLog mailing list
>>>> WriteLog at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/writelog
>>>> WriteLog on the web:  http://www.writelog.com/
>>>>
>>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web:  http://www.writelog.com/
>>>
>>>
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>
>
>
> --
>
> #1 Honor Roll Mixed
> Honor Roll RTTY
> 5BWAS
>
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
>



-- 

#1 Honor Roll Mixed
Honor Roll RTTY
5BWAS

Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk)
without my permission.