[WriteLog] Fwd: Re: WinKeyer Problems - Problem solved

[Hal Kennedy]

Ding, ding, ding we have a winner.  Thanks Joe!!  Under computer control 
the sidetone dsiappears, so I figured it wasn't working. Putting a VOM 
on the output shows that it is.  I really did not expect the paddle 
sidetone to also disappear, but it does.  So much for bench testing.

73 and thanks for all the help,
Hal N4GG

On 10/21/2014 2:48 PM, joeduerbusch wrote:
> Yes, I have the batteries in the keyer.  I would take a VOM and put it in
> the resistance mode, and go across the key1 output of the Winkey3 and look
> for the wiggle while keying from Writelog.
> If nothing, then I would suspect your Comport (USB) from Writelog/Winkey3.
>
> The other thing I would try is to move the USB Comport from the number you
> have to a comport number 4 or above.Sometimes those lower numbers, Windows
> reserves for other devices.
> I am using comport4.
>
> Joe K0BX
>
>
> On Tue, Oct 21, 2014 at 5:14 PM, Gary AL9A <al9a at mtaonline.net> wrote:
>
>>    Thanks Joe.  I stand corrected.  Good to know.
>>
>> 73,
>> Gary AL9A
>>
>>
>>
>>    *From:* joeduerbusch <k0bx at arrl.net>
>> *Sent:* October 21, 2014 7:31 AM
>> *To:* Gary AL9A <al9a at mtaonline.net>
>> *Cc:* writelog at contesting.com
>> *Subject:* Re: [WriteLog] Fwd: Re: WinKeyer Problems
>>    I don't seem to have any problem with Writelog newest version and the
>> WINKey3.
>> I am using Windows 7 64 bit.  Just worked VK9DLX on 20 CW a few minutes
>> ago using WL Function key macros to the Winkey3  I selected WinKey2 in the
>> WL setup menu for keyer.
>> Joe K0BX
>>
>> On Tue, Oct 21, 2014 at 6:06 AM, Gary AL9A <al9a at mtaonline.net> wrote:
>>
>>> Hal,
>>>
>>> Latest WL version is 11.22G, but I doubt that will solve your problem.
>>> If your device is a WinKey3 then you are probably going to need Wayne to
>>> release a new diver/interface for that device to make it work.
>>>
>>> 73,
>>> Gary AL9A
>>>
>>> -----Original Message----- From: Hal Kennedy
>>> Sent: October 20, 2014 3:53 PM
>>> To: writelog at contesting.com
>>> Subject: [WriteLog] Fwd: Re: WinKeyer Problems
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Latest version of WL, I think  11.21P.  Same problem on a WIN7 and an XP
>>> machine.
>>>
>>> Hal
>>> N4GG
>>>
>>> On 10/20/2014 7:03 PM, Joe Subich, W4TV wrote:
>>>
>>>> What version of Writelog?
>>>>
>>>>
>>>> 73,
>>>>
>>>>     ... Joe, W4TV
>>>>
>>>>
>>>> On 2014-10-20 6:56 PM, Hal Kennedy wrote:
>>>>
>>>>> Trying to hook up a K1EL Winkeyer USB (I think this is a WINKey 3) with
>>>>> WL.  If I go to >ports ad select CW on the proper COM port, then
>>>>> selected CW sends either the K1EL Winkeyer or K1EL WInkeyer 2 and hit
>>>>> "Apply"  The keyer locks up.  Any ideas?
>>>>> 73
>>>>> Hal
>>>>> N4GG
>>>>>
>>>>> _______________________________________________
>>>>> WriteLog mailing list
>>>>> WriteLog at contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/writelog
>>>>> WriteLog on the web:  http://www.writelog.com/
>>>>>
>>>>> _______________________________________________
>>>> WriteLog mailing list
>>>> WriteLog at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/writelog
>>>> WriteLog on the web:  http://www.writelog.com/
>>>>
>>>>
>>>
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web:  http://www.writelog.com/
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web:  http://www.writelog.com/
>>>
>>
>>
>> --
>>
>> #1 Honor Roll Mixed
>> Honor Roll RTTY
>> 5BWAS
>>
>> Stop the insanity!
>> Please do not add me to any distribution lists (Joke, Stories or Junk)
>> without my permission.
>>
>
>