[WriteLog] Using K3 KIO3B USB with Writelog

[john at kk9a.com]

I would like to do a better job of interconnecting the many devices in my
shack. Why do you recommend such a heavy and stiff #10 wire? Is smaller
wire or 3/8 braid acceptable?

John KK9A


To:	writelog at contesting.com, Reflector Elecraft <elecraft at mailman.qth.net>
Subject:	Re: [WriteLog] Using K3 KIO3B USB with Writelog
From:	Jim Brown <jim at audiosystemsgroup.com>
Reply-to:	jim at audiosystemsgroup.com
Date:	Fri, 25 Dec 2015 08:56:48 -0800

WRONG! The need for isolation transformers is a total fallacy. No
isolation transformers are needed with ANY radio if proper, simple
chassis-to-chassis bonding of all interconnected equipment is done in the
shack. It's easy and cheap -- all it takes is short lengths of plain,
ordinary copper wire.

Study http://k9yc.com/GroundingAndAudio.pdf

The tutorial is a bit long because I have to bust the "ground loop" myths.


73, Jim K9YC