[WriteLog] Using K3 KIO3B USB with Writelog

[Jim Brown]

Hi John,

The larger gauge conductor is for BONDING only. The intent is to 
minimize difference in potential between equipment by brute force Ohm's 
Law.  This is all discussed in the tutorial I referenced, both specific 
details of what needs to be bonded and WHY.

For the signal pair, conductors as small as #24 are fine.

73, Jim K9YC

On Mon,12/28/2015 11:13 AM, john at kk9a.com wrote:
> I would like to do a better job of interconnecting the many devices in my
> shack. Why do you recommend such a heavy and stiff #10 wire? Is smaller
> wire or 3/8 braid acceptable?
>
> John KK9A