[WriteLog] RTTY will not unkey after sending message macro

[Rich Hallman - N7TR]

Im new to writelog and hope this is a simple fix.

I installed WL with MMTTY on a new computer.  I'm also using FSK Keying with a Rigblaster PLUS II USB on COM 13.
When I installed WL with the MMTTYY plug-in as well.

MMTTY works fine by itself and confirmed TX and RX is configured ok and works.  I also had it working on the same computer with WIN-TEST.

I configured RTTYRITE for COM13 and used Software generate FSK DTR. I also set MMTTY FSK PTT Port to NONE so RTTYRITE had no conflicts.

When I press F1 and sends the macro....all the data looks correct and the radio transmits the data.  But after sending the macro it never unkeys the radio unless I press ESC.  I also see the PTT LED stays lit and CW LED flashes on the rigblaster until I hit ESC. This happens for all of the function keys that transmit.

What am I missing?

Thanks...

Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com<http://www.n7tr.com>
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster