[WriteLog] Fw: MMTTY, Navigator and Writelog.

[Gary AL9A]

Mike,

In the Rttyrite window click on Port and then move your cursor to More... 
just below the COM8 choice.  Another list of COM ports up to COM16 will open 
for you to select from.  I am running V11.23L, but the change to add more 
ports was made quite a while ago so your version may have it.  If not, time 
to upgrade.

73,
Gary AL9A

-----Original Message----- 
From: Mike Streeter via WriteLog
Sent: January 10, 2015 6:42 AM
To: WriteLog Reflector
Subject: [WriteLog] Fw: MMTTY, Navigator and Writelog.







Subject: MMTTY, Navigator and Writelog.

I have read as much as I can but have not been able to find any information 
on this specific matter. I am in process of setting up an SO2R station. My 
original station has operated for quite a few years using an Icom 746, 
Navigator and Writelog with the MMTTY plug in. I recently acquired an 
Elecraft K3 and have moved the Navigator and Writelog  over to it. That 
setup is working well.Now, I have purchased a second Navigator from 
Timewave, and they have set it up to operate on a second set of Com ports. I 
have it connected up to my second radio, the Icom 746. The original 
Navigator is on Com ports 3 through 8. The new Navigator is on Com ports 12 
through 17. My original intention was to use a single PC but I can use a 
second PC if I cannot get everything to work on one PC.I have set up the 
second Navigator with the Icom using MMTTY stand alone and it works just 
fine. (uses Com 15 for ptt). The problem occurs when I have Writelog with 
MMTTY and the plug in loaded. There are then have 3 screens, the Writelog 
log entry, the RTTY control panel and the Rttyrite screen. The ports setup 
on the Writelog entry screen is no problem, it can accept up to 16 ports (I 
don't need to use Com17), but on the Rttyrite screen the port setup allows 
for only 8 ports, which means I cannot set a port for the Navigator and 
therefore cannot use Writelog with the MMTTY plug in. Is there any way that 
Writelog can be configured to increase the number of ports on the Rttyrite 
screen? It seems odd that MMTTY stand alone can accept up to 16 ports, 
Writelog can accept 16 ports but the Rttyrite screen can only use up to 8 
ports.I am using MMTTY version 1.68A and Writelog version 10.73D. Do I need 
a later version of Writelog that allows for 16 ports in Rttyrite?
Mike, WM5DX.








_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/