[WriteLog] Band maps not working

[Randy Thompson K5ZD]

It sounds like WL is not talking to the radio.  If you don't have a
frequency from the radio, the band map won't move.

> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of
> Gordon Bousman
> Sent: Friday, November 13, 2015 8:17 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Band maps not working
> 
> I cannot get my Writelog Ver 11.30C bandmaps to work properly, have been
> trying to troubleshoot this problem for weeks without success with my
> SO2R setup interfaced via a microHAM MK2R+..  At program startup, both
> bandmaps show 3500 kHz and will not follow my IC-7600 or Pro-3.  I can
> transmit and decode RTTY just fine.  In the Window tab of Writelog, if I
> click on Band Map Window (BTW this item is not checked although the
> Bandmap windows are visible), nothing happens but if I close one or both
> bandmap windows, they cannot be re-opened by clicking on the Band Map
> Option.  Then the only way to get the bandmap windows displayed again is
> to shut down Writelog and restart the application.  I know that my port
> settings are correct in Setup; I've been using Writelog for years so am
> very familiar with setting up Writelog ports.  However I cannot seem to
> find a solution in spite of reinstalling the program several times.  BTW,
> in DX Labs, I can see my transceiver frequency in Winwarbler and it
> tracks the IC-7600 dial....this also via the microHAM MK2R+ interface so
> I don't think there is anything wrong with the MK2R+.  Any advice would
> be appreciated.
> 
> Thanks,
> Gordon NW7D
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/