[WriteLog] RTTY problem

[Joe Subich, W4TV]

> This morning I went through the micro Keyer ii and Writelog set up
> and got only as far as page three, setting up the MIsc. tab in MMTTY.
> The TX Port is set for Sound and the other 2 choices are grayed out
> and I am unable to change them to COM-TXD (FSK) for the TX Port. So I
> am stuck there. Weird.

Go to the TX tab in MMTTY and set the FSK & PTT port before going to
the MISC tab.  If you have not defined an FSK Port, MMTTY only allows
"Sound".

73,

   ... Joe, W4TV


On 2/13/2016 7:41 PM, Frank Fallon wrote:
> Rob,
>
> Sorry you are having problems but it sounds more like an MMTTY problem
> rather than a Writelog problem.
>
> I am having a weird problem here and believe it is also an MMTTY rather
> than a Writelog problem.  Everything is fine if I use the external
> keypad with the micro Keyer ii.  I worked VP8GSI with that combo on RTTY
> and CW but when I attempt to send RTTY from the computer keyboard within
> Writelog I apparently am transmitting a distorted signal.  As the
> external keypad with the MicroKeyer ii does not allow me to send call
> sign or contest numbers things get too cumbersome contesting.
>
> This morning I went through the micro Keyer ii and Writelog set up and
> got only as far as page three, setting up the MIsc. tab in MMTTY.  The
> TX Port is set for Sound and the other 2 choices are grayed out and I am
> unable to change them to COM-TXD (FSK) for the TX Port.  So I am stuck
> there.  Weird.
>
> But at least I am inside and warm.  It's going down to about 0 F tonight
> here on Long Island.
>
> 73 de Frank...N2FF.......
>
> On 2/13/2016 11:38 PM, Rob K6RB wrote:
>> I am having a problem with WriteLog in RTTY mode. I have it set with
>> AFC and ATC unchecked yet whenever I hit the “enter” key to log a QSO,
>> the AFC gets invoked. I literally have to cursor down during my
>> confirmation message, after having logged the QSO, and click on the
>> AFC button then quickly go back up to the entry window and put the
>> cursor in the call field and click. How do I get it to stop invoking
>> AFC every time I log a QSO?
>>
>> Before I noticed what was going on, I would have a lot of trouble
>> decoding responses because the Mark frequency would shift from 915 up
>> and down during RX. By doing what I’ve been doing, I’m getting more
>> consistent decoding but I’m way busier than I need to be with the
>> touch pad.
>>
>> Rob K6RB
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/