[WriteLog] Yaesu FT-950 CW Keying

[Keith Beebe W3KB]

Gary:

Are you using a 3 contact (stereo) plug to the key jack?  A 2 contact plug will short things out and key the rig.

Also, if the FT-950 has a built in keyer is it turned off?  If the built in keyer is on, it can exhibit what you describe when you try to send with Writelog.

Keith W3KB

-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Gary
Sent: Friday, January 15, 2016 12:55 PM
To: writelog at contesting.com
Subject: [WriteLog] Yaesu FT-950 CW Keying

I also sent this question to the FT-950 Reflector but I have not found a solution.

Is anyone in the group using Writelog with their FT-950.  I have been unable to get it to Send CW correctly.  I have tried all settings in Writelog and also the menu settings on the FT-950.  It will only send a series of dits or key the rig continuously.

l am using a simple home-brew, one-transistor interface, plugged into the Key jack on the rear of the FT-950.  It has worked perfectly with other radios (IC-736, IC-746PRO, Kenwood TS-2000).

My interface works perfectly with other software including Ham Radio, Deluxe, N1MM and AC Log by N3FJP.

I upgraded from Writelog V11 to V12 with the same results.
HP Duo Core E8400 Desktop
Windows 7.0 64-Bit
3Gb Memory
Using Com 1 (Serial Port, not USB).

Any suggestions will be appreciated.

Gary, wy0v
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/