[WriteLog] IC-7300 and WL setup

[Joe Subich, W4TV]

Use the "Address override" as documented in the WriteLog Help File
(AKA, "WriteLog Manual").  The process is completely documented -
used it for years with my IC-706mkIIg which has never been directly
supported.

73,

    ... Joe, W4TV

On 5/30/2016 6:15 PM, Ray Day wrote:
> Hi WL folks,
>
> I'm gradually getting my station re-set up using the new Icom IC-7300.
>
> So far so good with the radio talking to N3FJP's ACLog, etc., but I don't
> see in WL (v12.03G) a choice in setup/ports for the 7300.
>
> I'm using the microKEYER II interface and have it set up for the 7300, 9600,
> CI-V address 94 in "router ports" and in system settings I show 9600 and
> address 6A. All's well there. MicroKEYER MK2 and radio get along very well.
>
> But WL doesn't have a radio selection line for the 7300 (I've set the
> setup/ports screen as COM14, 9600, polling checked, and NO for comm PTT).
> I've tried a few other Icom rigs in that slot to see if they might work, but
> so far, no joy - I can't see the rig mode/freq in the Log Entry window..
>
> Does anybody have experience as to what I should put in as a radio choice in
> WL so the 7300 will be happy?
>
> Thanks in advance,
>
> Ray N6HE
>
>
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>