[WriteLog] Rigexpert TI-8 issue

Mark Klocksin mpklocksin at ameritech.net
Sat Nov 5 22:00:30 EDT 2016


Thom, glad you got it working.  

But…it sounds like it’s time to do something with that laptop. e.g., add memory, thoroughly scan it for maleware, or replace it.  No modern computer should take more than a few minutes to boot.  Also, many computer problems are fixed by rebooting.  I recommend rebooting weekly at a bare minimum.  I turn my computers off at night, except for the APRS i-gate desktop.  


73, Mark WA9IVH 


> On Nov 5, 2016, at 6:38 PM, Thom <ki8w at ki8w.com> wrote:
> 
> sometimes just when you think you have hit the bottom of the tower, the miraculous happens.
> 
> spent 3 hours visiting my son, taking him out to dinner and getting things for dinner tomorrow.
> 
> came home, did a test transmission with MMTTY on my 480sat into a dummy load. all was well.
> 
> Fired up Writelog, tested it and got a boat load of port not available messages.  Thought it might be time to re-boot this laptop. This laptop takes about 30 minutes to fully reboot.
> 
> Fired up Writelog. Now the darn thing is working just like it should...nice diddles and full FSK.
> 
> note to self.  if you use MMTTY for general communications, you need to reboot the computer before running Writelog if they are set up the exact same way.
> 
> A review. Rigexpert TI-8 Virtual Ports...
> 
> CAT = Com2
> 
> PTT = Com7
> 
> FSK = Com9
> 
> no EXTFSK or anything.
> 
> -- 
> 
> 73
> 
> Thom KI8W
> 
> "Living deep in the black hole of RF"
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/



More information about the WriteLog mailing list