[WriteLog] RTTY messages containing %e not at the end

[W2GR at aol.com]

Wayne,
 
All my messages DID have an (%E) at the end...with no characters after the  
(E). I just brought my msgs in from last years CQWW RTTY (in the old WL 
ver) to  the new version and when I did that for the RTTY Sprint over the  
weekend MSG box msg did not appear. All worked OK. I wouldn't want  anything 
after the E!
 
I just opened the set up messages again and hit "no"...the cursor went to  
the first (F02) line...all is OK there. And it appears every time I hit OK 
when  trying to exit the msgs setup screen. Ver. 12.08C
 
73
 
Mike W2GR
 

 
 
In a message dated 9/19/2016 3:50:57 P.M. Eastern Daylight Time,  
support at writelog.com writes:

> Put  all my messages in starting each with %r and ending all with space
>  %E... hit ok/apply and a message box appeared with the following: rtty
>  memory %E not at end of message. Do you really want that? yes or no.
>  [stuff deleted] Finally just closed  the whole window and the  messages
> seem to just work just fine. 

If you answer "No" to  the message box "do you really want that?" the
cursor is placed on the  (first) message that has a %e not at the end. 
Since you don't post a  reason you want a message to have characters
after the %e, its likely you  really want to fix this as there will be a
problem later: you're  going  press f-Keys and complain that the message
you wanted to send  did not get sent (because the Rttyrite window is
instead sending the left  over characters after the %e in the previous
f-key you pressed) and you  have to press another f-key and WL sends the
wrong message,  etc.

Wayne
_______________________________________________
WriteLog  mailing  list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog  on the web:   http://www.writelog.com/