[WriteLog] Flex 6700 and Writelog 12.10E

[john at kk9a.com]

I had an issue during the CQWW RTTY contest and discovered afterwards that
my headphone setting also did not stick, so that is normal for Writelog.  I
only use RTTYRITE for RTTY contest so I never tried to have it open
automatically.  My port settings seem to stick but I don't believe that I
tried PTT.

GL
John KK9A 




Re: [WriteLog] Flex 6700 and Writelog 12.10E
from [Steve AI9T]	[Permanent Link][Original]
To:	Wayne <support at writelog.com>, Writelog Forum
<writelog at contesting.com>
Subject:	Re: [WriteLog] Flex 6700 and Writelog 12.10E

My other question was regarding WL not saving my changes in the Setup. For
instance in Ports setup I have rig type 1 set to Flex 6000 and Comm PTT to
YES. Rig Type 2 is also set to Flex 6000. If I set Comm  PTT to YES on Rig
Type 2 and save settings. Then close and restart WL the setting for Comm PTT
on Rig Type 2 is back to NO. It will also not save my Head Phone settings.
If I want the RTTYRITE window to open when I start WL it will not allow that
either. I am saving configuration and doing a file save.

I may be doing something wrong but not sure what it is.

73

Steve AI9T