[WriteLog] WL IC-7610 help

[Jim Reisert AD1C]

I have the 7610 and one of the original microKEYERs.  I simply set all
my software up as an IC-7600, but told the software to expect hex
address code 98 (for 7610) and all is working.  I attempted to get
things going using the 7610's USB interface and was able to make a
single FT8 QSO using the 7610's internal sound card, but I never tried
to get CW, FSK and PTT working through the USB interface.  Since I
already had at the microKEYER, it was easier to just use everything
that was already in-place, plus it gave me a second CAT port for free.

Al, K7AR told me he has had success using CW and FSK through the 7610
USB interface.  You may try contacting him.

Or you can try the 7610 reflector:

   https://groups.yahoo.com/neo/groups/ic-7610/info

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us