[WriteLog] WL IC-7610 help

[Jon Suehiro]

Thanks, finally seems everything is working OK as I reported separately.  Yes, I joined to the Yahoo group too but not seeing enough information.

73 OM de Jon NN5T


-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu] 
Sent: January 3, 2018 17:42
To: Jon Suehiro
Cc: WriteLog
Subject: Re: [WriteLog] WL IC-7610 help

I have the 7610 and one of the original microKEYERs.  I simply set all my software up as an IC-7600, but told the software to expect hex address code 98 (for 7610) and all is working.  I attempted to get things going using the 7610's USB interface and was able to make a single FT8 QSO using the 7610's internal sound card, but I never tried to get CW, FSK and PTT working through the USB interface.  Since I already had at the microKEYER, it was easier to just use everything that was already in-place, plus it gave me a second CAT port for free.

Al, K7AR told me he has had success using CW and FSK through the 7610 USB interface.  You may try contacting him.

Or you can try the 7610 reflector:

   https://groups.yahoo.com/neo/groups/ic-7610/info

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us