[WriteLog] How to define default CW speed to be stored at start up, in ini file?

[Craig KØCF]

Kari,
Open the Setup menu, then choose "Ports...". In the dialog that
comes up, use the left-right arrows in the top right corner to
scroll to the right until you can see the tab "CW Speeds". Select
it. You will see a grid of all the CW speeds. You can set these
to whatever you like, but the first one in the second row is
the default speed. Mine is set to 28, and my range of speeds is
from 12 to 42 WPM in 2 WPM increments, e.g. 12, 14, 16... 28,30,32...

Your preferences may vary!

73, Craig, KØCF

----------------------------------------------------------------------

Message: 1
Date: Tue, 27 Mar 2018 18:41:51 +0200
From: "Kari Gustafsson" <kari at sm0hrp.se>
To: <writelog at contesting.com>
Subject: [WriteLog] How to define default CW speed to be stored at
	start up, in ini file?
Message-ID: <000001d3c5ea$822f8d90$868ea8b0$@sm0hrp.se>
Content-Type: text/plain;	charset="us-ascii"

Hi, 
Anyone know how to define the default CW speed at start up so one has not to
do it all over every time you launch WL? 

I run SO2R so doing it on both radios would be attractive.

73s Kari SM0HR