[WriteLog] K3 steady keying

[William Liporace]

Did not have it set for PC generates CW... Fresh look when I got a chance...

Will WC2L

On 5/25/2018 9:55 AM, Robert wrote:
> In your K3
> Check the PTT and CW settings on incoming serial port
>
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of William
> Liporace
> Sent: Friday, May 25, 2018 3:57 AM
> To: writelog at contesting.com
> Subject: [WriteLog] K3 steady keying
>
> I just started WriteLog. This is a new setup. Full paid version.
> As soon as I enable the com port and hit apply, the radio goes into a steady
> keying state. I know it is something simple.... The radio and WriteLog are
> new to me...
>
> FYI, N1MM works just fine.
>
> TNX Will WC2L
>
> --
> William Liporace WC2L
> http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node  telnet
> dxc.wc2l.com or 144.93 MHz wc2l at wc2l.com
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>

-- 
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
wc2l at wc2l.com