[WriteLog] Filter changing

[Don Hill AA5AU]

I can confirm there's something going on with changing of Icom filters when clicking on packet spot in the bandmap of WriteLog. I never noticed it on RTTY before because I use the twin peak filter (TPF) on RTTY in my IC-756 PRO III. When the TPF is turned off, there are three filters in the PRO III named 1, 2 and 3. With TPF turned off, when I double-click a packet spot in the bandmap, the filter is changed to filter #2 each time.

This also happens in CW and SSB. Each time a packet spot is double-clicked, the filter is changed to #2.

I'm using 12.33A which is beta.

Don AA5AU


-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Doug Nelson via WriteLog
Sent: Monday, October 1, 2018 3:51 PM
To: WriteLog at contesting.com
Subject: [WriteLog] Filter changing

I have my RTTY filter bandwidth set at 200Hz on my 7610 and 7600.  Not sure how long this has been going on, but became aware during the CQWW that if I double clicked on a call in the bandmap, or anywhere on the left side of the bandmap, the RTTY filter bandwidth would jump to 500 Hz.  It can be returned to 200 Hz with a push of the filter button.  This is on both radios.  Anyone else seeing this?

I was running v12.30 during the contest, but just upgraded to 12.32.  No change.  Running Windows 7.  Also tried a different contest module.  No change.

Thanks….Doug….K6HGF
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/