[WriteLog] WW Digi WL/FT issues

[Randy Thompson K5ZD]

Never mind. I knew when I hit the appropriate frustration level to request help, I was close to figuring it out.  😊

I had the box checked to set the rig to USB.  The K3 wanted me to be in Data mode A.  Once I unchecked the box, things started happening.  Just as the test session ended.

Sorry for the noise.

FT4 certainly speeds up the QSO process!

Randy K5ZD

> -----Original Message-----
> From: WriteLog <writelog-bounces at contesting.com> On Behalf Of Randy
> Thompson K5ZD
> Sent: Friday, August 16, 2019 3:54 PM
> To: 'Writelog Reflector' <writelog at contesting.com>
> Subject: [WriteLog] WW Digi WL/FT issues
> 
> I am using WL 12.42 and DigiRite 1.1.18 with an MK2R+ as the sound/radio
> interface.  I am using a computer setup where WSJT-X is working for both
> FT8 and FT4.
> 
> 
> 
> During the WW Digi Contest test session this afternoon, I am unable to
> make QSOs using WL.  DigiRite is able to decode stations.  When I
> transmit, I see the PTT engage, but there is just a brief bit out sound
> output and then it stops.  So no transmit audio after that first brief
> blip.
> 
> 
> 
> Any suggestions?
> 
> 
> 
> I have had DigiRite working before so was not expecting this to be
> difficult.
> 
> 
> 
> Randy K5ZD
> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/