[WriteLog] Digirite and IC-7300 / VFO and USB-D issue

[I2SVA - Alessandro]

Hi all,

 

I am trying to set up Digirite (1.1.23) and Writelog (12.42G) with Icom IC-7300.

The IC-7300 must be set to USB-D mode when using FT4/8.

My issue is that when Digirite moves to TX it always switch the rig (IC-7300) from USB-D to USB, even if the File|Setup check-box “Always force rig to USB mode “ is NOT checked (as a matter of fact there is no difference if the box is checked or not). The only way to avoid the issue is to check “NO VFO CONTROL” but this is not a good solution.

Any help?

 

Thanks, 73

Alessandro, i2sva