[WriteLog] Cannot Send CW From Function Keys

[Don AA5AU]

 Windows 10 updates can break the Bandmap in WriteLog. This last update did on mine. The fix is to re-install the last version you have.
It doesn't hurt anything to re-install WriteLog. 
Maybe a PC restart fixed it?
Don AA5AU
    On Wednesday, February 6, 2019, 11:52:15 AM CST, John Desmond <johnk0tg at gmail.com> wrote:  
 
 An update....

I took a break from it last night and brought up the PC again and it
works.  I did not change anything.  This is what happened last time too.

Has anyone else seen flakey stuff like this going on lately?  I suspect a
Windows update as a possibility.


73, John  K0TG @ W0LSD/NC0DX

On Tue, Feb 5, 2019 at 11:08 PM John Desmond <johnk0tg at gmail.com> wrote:

> Hi,
>
> I have had this problem before and now am having it again.
>
> I am using my laptop which is usually set to operate with my Flexradio.  I
> am away from home and using a Microham MicroKeyer.  I think the Mk is set
> properly as I can send CW from the ALT-K just fine.  I cannot send any
> macros from WL (and there are some loaded).  The INI looks OK.
>
> There is one other strange thing going on and that is WL will not read the
> rig freq properly.  It is like it takes a snapshot of the connection then
> will not track the VFO.  When I look at the uRouter it is tracking just
> fine.
>
> I am using an IC-7600.
>
> When I had this issue before, it just cleared up on it's own.  This time
> it does not appear to be willing to do that.  :)
>
> I am running WL version 12.36K and uRouter 8.8.2 on Windows 10.
>
> Any thoughts out there?
>
>
> 73, John  K0TG
>
>
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/