[WriteLog] Rig goes to 160M LSB instead of CW in Writelog IARU HF Contest module

[Arunas, LY2IJ]

HI,
I have same issue, new WL installation, editing 160 SSB subband from
default 1800-2000 to 1840-2000 fixes issue.
Just net to restart WL to accept changes, not easy in middle of contest.

73
Arunas LY2IJ/LY5E

On Mon, 15 Jul 2019 at 00:57, Keith Beebe W3KB <keith at w3kb.net> wrote:

> For whatever reason my rig, using Writelog in the recent IARU HF
> Championship contest, goes to LSB on 160 meters instead of CW when clicking
> on a spot in the Band Map.  I was operating only on CW, not Mixed mode (CW
> and SSB) in this contest therefore obviously clicking only in the CW
> frequencies on 160.
>
> NOTE: All of the other bands 80 through 10 meters worked perfectly
> clicking on the CW spots from the Reverse Beacon Network. The rig stayed on
> CW on those bands.
>
> For another reference, I just tested putting a frequency, say 1835, in the
> Entry Window itself and it does the same thing.  The rig goes to LSB
> instead of CW.
>
> However, if I click the box to the left of the Entry Window it opens to
> the settings for Logging / Duping.  Putting a frequency, say 1825 on CW in
> that particular window and the rig goes to CW like it should.
>
> Go back to the Entry Window and put in a 160 meter frequency it will go to
> LSB not CW !   Clicking on a 160 spot in the Band Map will also make it go
> to LSB not CW.
>
> Why is only 160 meters having this issue?
>
> Again, this is only the IARU HF contest "module" doing this and only on
> 160 meters.  Yes, I also tried a few other modules (such as the one for the
> CWT's) and 160 CW works perfectly.
>
> Keith W3KB
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>