[WriteLog] Rig goes to 160M LSB instead of CW in Writelog IARU HF Contest module

[robert]

     GM Keith

         I noticed the same situation also.  My rig a FT 1000 Mark 5.  
Writelog ver 12.35c.

         OBTW congrats on beating me again in IARU.  It has been a few 
years, since I last beat you,

        so next year watch out. Hi Hi.

                     73  BoB WA1FCN


On 7/14/2019 4:57 PM, Keith Beebe W3KB wrote:
> For whatever reason my rig, using Writelog in the recent IARU HF Championship contest, goes to LSB on 160 meters instead of CW when clicking on a spot in the Band Map.  I was operating only on CW, not Mixed mode (CW and SSB) in this contest therefore obviously clicking only in the CW frequencies on 160.
>
> NOTE: All of the other bands 80 through 10 meters worked perfectly clicking on the CW spots from the Reverse Beacon Network. The rig stayed on CW on those bands.
>
> For another reference, I just tested putting a frequency, say 1835, in the Entry Window itself and it does the same thing.  The rig goes to LSB instead of CW.
>
> However, if I click the box to the left of the Entry Window it opens to the settings for Logging / Duping.  Putting a frequency, say 1825 on CW in that particular window and the rig goes to CW like it should.
>
> Go back to the Entry Window and put in a 160 meter frequency it will go to LSB not CW !   Clicking on a 160 spot in the Band Map will also make it go to LSB not CW.
>
> Why is only 160 meters having this issue?
>
> Again, this is only the IARU HF contest "module" doing this and only on 160 meters.  Yes, I also tried a few other modules (such as the one for the CWT's) and 160 CW works perfectly.
>
> Keith W3KB
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/