[WriteLog] CW Jitters

rgarrett5 at comcast.net rgarrett5 at comcast.net
Sun Aug 2 18:36:54 EDT 2020


Hello Robert  et al,

 

So under “CW” in the configuration section, I have 8 choices.  The only MicroHam setting is for MKR which is used with SO2R.  I’m a visually impaired guy so if there is another place on the screen where Microham MKII is listed, please tell me.  I certainly am not able to read it.

 

The only other setting for CW is the five choices I assume for LPT and com ports.  Any input appreciated.  73, Bob K3UL

 

From: Robert <woodr90 at gmail.com> 
Sent: Sunday, August 2, 2020 4:43 PM
To: rgarrett5 at comcast.net
Subject: RE: [WriteLog] CW Jitters

 

FWIW

 

I’m hooking up winkey2 this month 

 

have used the PC generated CW in past – normally it works great but think RF got computer few times on that transistor interface

and it would jitter & quit.  then reboot…

 

 

check the writelog settings, if you’re got Microham 2 set in CW window, then it’s a mystery to me

My only experience with Microham was at Carl’s rental, the P40YL side had MicroHam, Most – including me, unhooked it and used USB to RS232 or whatever instead then hooked back up as was.   

 

73 W5AJ

 

Robert

Midland, Texas

 

From: rgarrett5 at comcast.net <mailto:rgarrett5 at comcast.net>  [mailto:rgarrett5 at comcast.net] 
Sent: Sunday, August 02, 2020 1:24 PM
To: 'Robert' <woodr90 at gmail.com <mailto:woodr90 at gmail.com> >
Subject: RE: [WriteLog] CW Jitters

 

Hello Robert,

 

MicroHam MKII.  

 

I just want to be sure I don’t have some incorrect setting where I believe I’m using the WINKEYER in the MicroHam MKII when I’m not and actually using PC generated CW..  

 

From: Robert <woodr90 at gmail.com <mailto:woodr90 at gmail.com> > 
Sent: Sunday, August 2, 2020 2:04 PM
To: Bob Garrett <rgarrett5 at comcast.net <mailto:rgarrett5 at comcast.net> >
Subject: Re: [WriteLog] CW Jitters

 

How are you interfacing from writelog/computer to Rig on CW?

 

PC generate?

Winkeyer?

Etc?

 

W5AJ

 

On Sun, Aug 2, 2020, 7:10 AM <rgarrett5 at comcast.net <mailto:rgarrett5 at comcast.net> > wrote:

Greetings,

I've had an ongoing problem using WriteLog with CW breaking up or having some delays, speeding up or slowing down, mostly speeding
up in the middle of a message.  Any thoughts as to why this behavior?  73, Bob K3UL

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com <mailto:WriteLog at contesting.com> 
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/



More information about the WriteLog mailing list