[WriteLog] FTdx 5000 low monitor audio

[beaudoin]

GE All

             Well Ok I admit it...........Operator error, now remember I 
just got rig

         a couple days ago........   I simply had monitor OFF !! A 
simple press of button

         and all the audio anyone could use!

                     See ya all in ARRL Roundup        BoB WA1FCN

On 12/16/2020 6:33 PM, Joe Subich, W4TV wrote:
>
> FTdx5000 monitor audio is a function of the transceiver.  The FTdX5000
> Operating Manual - page 81 only references Monitor in LSB/USB/AM/FM
> there is no reference as far as I can find to a Monitor function for
> RTTY/AFSK-based DATA operation.   I suggest you contact Yaesu about
> a "RTTY/Data monitor" capability.
>
> DK II does not have a separate "sound card monitor" function.  You
> can connect a *powered speaker* to the u2R Out jack to hear the output
> of the sound card but that is not a supported configuration.  A non-
> amplified speaker will not work and will result in "hot mic" type
> operation.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2020-12-16 6:53 PM, beaudoin wrote:
>>
>>      GE All
>>
>>          Well I was struggling trying to get my new FTDX 5000 mp 
>> going on RTTY with Microham
>>
>>              Digikeyer 2.  I finally got a semi-local to sked a qso 
>> .... It turns out I was ok but what gave me
>>
>>              problem is monitor has no audio to listen to.  The local 
>> said his is VERY Low.  Is it a setting
>>
>>              we need to look at?
>>
>>                      73  BoB WA1FCN
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/