[WriteLog] Writelog Interfering Tone

[Bob Bash]

Try changing modes within the app to see if that affects the symptom and
review your settings. How are you controlling cw-rtty to the rig? USB,
serial or analog?

On Sat, Mar 28, 2020, 12:35 PM Keith Beebe W3KB <keith at w3kb.net> wrote:

> May not be Writelog itself sending the tone.
>
> What happens here is that Writelog keys a port on startup and what is
> happening is it keys the rig itself. Therefore the tone is the rig's
> sidetone monitor for CW or RTTY.
>
> When you exit the program it no longer keys the rig and thus the sidetone
> ends.
>
> Keith W3KB
>
>
> -----Original Message-----
> From: WriteLog <writelog-bounces at contesting.com> On Behalf Of James Brown
> Sent: March 28, 2020 12:10 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Writelog Interfering Tone
>
> When I launch the program, a tone is transmitted to the rig and come out
> through the speakers,  or through the earphones if they are plugged in.
>
> This tone remains constant and is around 800hz or so.  It does not change
> when changing bands or frequency.
>
> When exiting the program, the tone disappears.
>
> This is interfering with hearing weak stations, and is just maddening.
>
> Am running the newest version.   Rig is TS890, but did the same with the
> TS590
>
> Any suggestions?
>
> Thanks     Jim    W4LC
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>