[WriteLog] Writelog Interfering Tone

[Keith Beebe W3KB]

May not be Writelog itself sending the tone.

What happens here is that Writelog keys a port on startup and what is happening is it keys the rig itself. Therefore the tone is the rig's sidetone monitor for CW or RTTY.

When you exit the program it no longer keys the rig and thus the sidetone ends.

Keith W3KB


-----Original Message-----
From: WriteLog <writelog-bounces at contesting.com> On Behalf Of James Brown
Sent: March 28, 2020 12:10 PM
To: writelog at contesting.com
Subject: [WriteLog] Writelog Interfering Tone

When I launch the program, a tone is transmitted to the rig and come out through the speakers,  or through the earphones if they are plugged in.

This tone remains constant and is around 800hz or so.  It does not change when changing bands or frequency.

When exiting the program, the tone disappears.

This is interfering with hearing weak stations, and is just maddening.

Am running the newest version.   Rig is TS890, but did the same with the
TS590

Any suggestions?

Thanks     Jim    W4LC
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/