[WriteLog] Contest Simulator SO2R

[Tom Georgens]

OK – I did not understand that.

 

I don’t know if all the WL headphone control is implemented with the simulator.  I have used the radios split, one in each ear,  with the simulator and that works fine.

 

Let me know if you need help with the runmode module

 

Tom

 

From: Ken Claerbout <kenk4zw at gmail.com> 
Sent: Friday, May 8, 2020 11:52 AM
To: Tom Georgens <tomgeorgens15 at gmail.com>
Cc: writelog at contesting.com
Subject: Re: [WriteLog] Contest Simulator SO2R

 

Hi Tom - it looks like what you mentioned is in the WriteLogRunMode module?  I haven't installed that yet.

 

I'm trying to get the headphone "Latch" function, which works on the basic Writelog program, working on the contest simulator.  From what I've read, it should work.  

 

I've not used the RunMode module yet.  That's next.

 

73

Ken K4ZW

 

On Tue, May 5, 2020 at 9:56 PM Tom Georgens <tomgeorgens15 at gmail.com <mailto:tomgeorgens15 at gmail.com> > wrote:

Ken 

In the "RunMode settings" window you need to check "Dynamic Headphone
split."  It will put both headphones on the radio not transmitting and split
them if neither is transmitting.

To get the settings window to open, you need to create a keyboard shortcut
for "External: Setup" just like what you need to start and stop
2RadioRunMode

GL Tom W2SC


-----Original Message-----
From: WriteLog <writelog-bounces at contesting.com <mailto:writelog-bounces at contesting.com> > On Behalf Of Ken Claerbout
Sent: Tuesday, May 5, 2020 5:47 PM
To: writelog at contesting.com <mailto:writelog at contesting.com> 
Subject: [WriteLog] Contest Simulator SO2R

Hi Gang - struggling a bit and thought I would throw this out on the
reflector.

I'm trying to get SO2R working with the simulator, using the headphone latch
(CTRL X) function.  I've used it for years during real contests.

On the simulator, I have each radio working independently, able to run on
either radio.  When I engage CTRL X for latch, I continue to get sidetone
from the run radio.  I don't hear the S&P radio when the run radio is
transmitting for example.  It doesn't matter which of the two radios I'm
using for run or S&P.

CW Keyer type and SO2R Control are set for WinKey+ORSTP Pipes.

What am I missing?

73
Ken K4ZW
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com <mailto:WriteLog at contesting.com> 
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/