[WriteLog] getting mortty working in so2v on writelog

[Jeff Stai]

Reporting back - one more restart did the trick. Of course :) Thanks! -
jeff wk6i



On Fri, Jan 7, 2022 at 9:16 PM Ed Muns <ed at w0yk.com> wrote:

> An additional comment.
>
>
>
> What I described below is how I prefer to use TinyFSK with WL.  An
> alternative is to set Rttyrite Ports to ‘None’ and select your TInyFSK Com
> port in MMTTY, then select TinyFSK in MMTTY.  This may require installing
> the EXT64 add-on to MMTTY, I forget, which is one reason I prefer to use
> Rttyrite’s TinyFSK as described below.
>
>
>
> 73,
>
> Ed W0YK
>
>
>
> *From:* Ed Muns <ed at w0yk.com>
> *Sent:* 07 January, 2022 21:09
> *To:* 'Jeff Stai' <wk6i.jeff at gmail.com>
> *Cc:* 'Mortty at groups.io' <Mortty at groups.io>; 'Writelog Reflector' <
> writelog at contesting.com>
> *Subject:* RE: [WriteLog] getting mortty working in so2v on writelog
>
>
>
> Yes,TinyFSK is grayed out for me sometimes too and a restart has always
> solved it.
>
>
>
> To use the WL TinyFSK feature, you need to configure Rttyrite to use “its
> own” RTTY encoder, not MMTTY’s or 2Tones.  So set MMTTY’s Tx Com Port to
> ‘None’ and select Rttyrite’s Port to the Com number where your Mortty is.
>
>
>
> 73,
>
> Ed W0YK
>
>
>
> *From:* Jeff Stai <wk6i.jeff at gmail.com>
> *Sent:* 07 January, 2022 20:34
> *To:* Ed W0YK <ed at w0yk.com>
> *Cc:* Mortty at groups.io; Writelog Reflector <writelog at contesting.com>
> *Subject:* Re: [WriteLog] getting mortty working in so2v on writelog
>
>
>
> I've tried reloading/restarting several times. I feel like I'm missing a
> setting some place. "Share Transmit FSK port" is not grayed out but TinyFSK
> is grayed out. - j
>
>
>
> On Fri, Jan 7, 2022 at 4:59 PM Ed W0YK <ed at w0yk.com> wrote:
>
> I've been operating this way since shared Com port for FSK was added to
> WL.Sometimes Shared Comport is grayed out and exiting/reloading WL fixes
> it.73,Ed W0YK
> -------- Original message --------From: Jeff Stai <wk6i.jeff at gmail.com>
> Date: 1/7/22  15:40  (GMT-08:00) To: Mortty at groups.io, Writelog Reflector
> <writelog at contesting.com> Subject: [WriteLog] getting mortty working in
> so2v on writelog Haven't done this before... I have a K3 with sub receiver
> that is runningwritelog in so2v mode (where the main and sub each appear as
> a separateradio via a single COM port).I think I should be able to
> configure things with Mortty such that theMortty transmits for either
> selected VFO. Right?I'm just not seeing how to do that. I can't select the
> Mortty COM port onthe sub vfo, and choosing "Share Transmit FSK port" isn't
> working either.Anyone figured this out? thanks jeff wk6i-- Jeff Stai ~ WK6I
> ~ wk6i.jeff at gmail.comRTTY op at W7RNTwisted Oak Winery ~
> http://www.twistedoak.com/_______________________________________________WriteLog
> mailing listWriteLog at contesting.comhttp://
> lists.contesting.com/mailman/listinfo/writelogWriteLog on the web:
> http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
>
>
> --
>
> Jeff Stai ~ WK6I ~ wk6i.jeff at gmail.com
>
> RTTY op at W7RN
>
> Twisted Oak Winery ~ http://www.twistedoak.com/
>


-- 
Jeff Stai ~ WK6I ~ wk6i.jeff at gmail.com
RTTY op at W7RN
Twisted Oak Winery ~ http://www.twistedoak.com/