[Yaesu] RTTY Hook-up

Robert Wanderer aa0cy@robertwanderer.gardnerville.nv.us
Sun, 29 Sep 1996 16:52:25 -0700

I am confused by the FT-1000 Manual regarding RTTY hook-ups.

I am using a very old (~12 yrs) Kantronics Interface II, but I don't think
its age is an issue.  It has both FSK output (via open collector +40Vdc
max) as well as AFSK (Mark 2125Hz and Space 2295Hz for 170Hz

Which do I use?  I believe the FSK output to pin 1 of the 4-pin DIN plug
used for RTTY.  Am I correct?  (I assume AFSK would go to the mic.)

Thanks in advance and 73,
Bob AA0CY <aa0cy@robertwanderer.gardnerville.nv.us>

FAQ on WWW:               http://www.contesting.com/yaesufaq.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:  	          ke7gh@contesting.com
Sponsored by:		  Akorn Access, Inc & KM9P