[Yaesu] FT1000 & DSP2232

[Nate Dixon]

> Hey David, I have an AEA DSP 2232 interfaced to an FT1000MP.  As I
> understand the pin out etc are the same on each radio (unplug the
> connector and plug it into either radio).  All works as advertised but
> you will have to take the FSK output from the 2232 from a different
> spot than where you are getting RX audio and the PTT line.  I don't
> know if this mail helps but 2232 should work with the "D" as well.
> 
> -Nate
> N7OS
> 
> ----------
> From: 	David[SMTP:dlcole@ibm.net]
> Sent: 	Monday, March 31, 1997 6:23 AM
> To: 	yaesu@contesting.com
> Subject: 	[Yaesu] FT1000 & DSP2232
> 
> Anyone have any luck getting the FT1000D to work with an AEA DSP2232	
> TNC?  I get receive audio and PTT on both RTTY and Packet.  I don't
> get a shift tone on RTTY nor do I get AMTOR/PACTOR tones on Packet.
> 
> Maybe I should give up on the back input and wire an 8 pin mic
> connector
> and headphone jack like I did on my ond TS830s.  That radio worked
> great on RTTY and other digital modes.
> 
> Advise..
> David
> WD5BZY
> dlcole@ibm.net
> 
> --
> FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com
> 
> 

--
FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com