[Yaesu] FT1000 & DSP2232

[John C. Lane]

I have a DSP-2232 interfaced to an FT-1000.  The system works fine but you
may have to adjust the FT-1000 internal level controls if your driving the
DSP-2232 with AFSK.  I believe mine had to be set all the way up. The
DSP-2232 and FT-1000 is a great data radio combination.  -- John Lane, W8KX


----------
> From: David <dlcole@ibm.net>
> To: yaesu@contesting.com
> Subject: [Yaesu] FT1000 & DSP2232
> Date: Monday, March 31, 1997 3:23 PM
> 
> Anyone have any luck getting the FT1000D to work with an AEA DSP2232	
> TNC?  I get receive audio and PTT on both RTTY and Packet.  I don't
> get a shift tone on RTTY nor do I get AMTOR/PACTOR tones on Packet.
> 
> Maybe I should give up on the back input and wire an 8 pin mic connector
> and headphone jack like I did on my ond TS830s.  That radio worked
> great on RTTY and other digital modes.
> 
> Advise..
> David
> WD5BZY
> dlcole@ibm.net
> 
> --
> FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com

--
FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com