[Yaesu] 8 pin DIN for FT-1000/990 BAND DATA

[tgstewart@pepco.com]

They are available from most dealers, Yaesu direct, or RF Connection
www.therfc.com

73, Ty K3MM




To:   yaesu@contesting.com
cc:    (bcc: Tyler G Stewart/BENN/CEC)
Subject:  [Yaesu] 8 pin DIN for FT-1000/990 BAND DATA




I need a source for the 8 pin DIN plug for the BAND DATA jack for the
FT-1000 and FT-990.   The "standard" 8 pin DIN obtainable at Radio Shack
and elsewhere does not fit the BAND DATA jack - although the "standard"
plug will fit the 990's REMOTE jack.   The 990 has two 8 pin DINs - one
for the REMOTE and the other for BAND DATA - and they are different.
Does anyone have experience with driving band decoding devices (bandpass
filters, antenna relays, etc.) with the BAND DATA output from the 1000
and/or 990?   I'm homebrewing a CD4028B band decoder and would like to
gain from your experiences.
Any help is appreciated.
thanks & 73  James / k1sd
--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm








--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm