[Yaesu] CAT cable for 1000D

Joe Subich, K4IK w8ik@subich.com
Tue, 28 Aug 2001 13:19:31 -0400


Jeff,

The pinout for the FT-1000D CAT connector (6 pin DIN) is on page 7
of the manual:

                Pin 1:  Ground
                Pin 2:  Serial Out (TTL)
                Pin 3:  Serial In  (TTL)
                Pin 4:  PTT
                Pin 5:  S/PO (AGC voltage)
                Pin 6:  n/c

There are several RS-232 to TTL converter schematics on the web
and almost an equal number of niche marketers selling interfaces
and/or kits.  You can also purchase the Yaesu FIF-232 interface
from most Yaesu dealers.  Unfortunately, I do not have a current
list of URLs ...

73,

   ... Joe, K4IK (ex-AD8I, W8IK)


-----Original Message-----
From: yaesu-admin@contesting.com [mailto:yaesu-admin@contesting.com]
      On Behalf Of Jeff kb2m
Sent: Tuesday, August 28, 2001 11:09 AM
To: yaesu@contesting.com
Subject: [Yaesu] CAT cable for 1000D


Does anyone know where I can find a schematic for a CAT cable for a 1000D? I
went through the archives all the way back to 1998, nothing found. I have a
cable that I use with my Yaesu VX5R, FT-90, etc, this level converter cable
also works with my Icom 706. All I really need is the pinout for the large
DIN connector on the 1000D, so I can make an adapter plug. Thanks in advance
.

73 Jeff kb2m