[Yaesu] FT-100 with the VL-1000

[David Wright]

Yes, you need to unplug the cable from one socket and plug it into another socket.

Dave - N8IT

On Fri, 12 Apr 2002, W.P.Van Horn wrote:

> I want to use my FT-100D with my VL-1000 amp.There is an instruction on page 19 of the FT-100D Operating Manual that says "When operating the FT-100D with the VL-1000 Solid State 1 KW Linear Amplifier, change the internal connections of the FT-100D as shown below." There is a sketch of the bottom side of the FT-100D showing a cable with two plugs and three sockets with an arrow going form one socket to another. I don't understand that instruction. Must I remove the bottom cover of the FT-100D to see the area referred to in the sketch?